DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 455

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Temperature Input Terminals
434
1,2,3...
Note
■
Adjusting the DRT2-TS04T’s Bias Compensation Value
11. Click the Fix upper adjusting Value Button. The upper limit adjustment
12. To check whether the user adjustment values have been accepted and the
1. When checking whether or not the user adjustment values have been set
2. If the correct reference voltage was not input, the adjustment values may
1. Disconnect the reference voltage/current generator (STV) and short the
2. After completing the wiring, wait at least 40 minutes, and click the Fix Bias
value will be stored in the Unit.
Unit is operating with adjustment values different from the factory defaults,
click the right mouse button over the Slave icon and select Maintenance
Information to open the Maintenance Information Window.
Select the Tab Page for the input that was adjusted. If there is a check in
the User Adjustment Box (bottom right box), the Unit is operating with us-
er-set adjustment values.
correctly, always refresh the data by clicking the Update Button in the
Maintenance Information Window’s General Tab or uploading the settings
again. For details on the Maintenance Information Window, refer to 7-3
Maintenance Information Window.
not be accepted.
leads from the ZERO-CON (0 ° C bath).
adjusting Value Button. The bias compensation value will be stored in the
Unit.
Section 7-6