DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 86

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Setting Using the
DeviceNet
Configurator
Functions of General-purpose Slaves and Environment-resistive Slaves
1,2,3...
Note
OFF→ON
1. The Contact Operation Counter and Total ON Time Monitor cannot be
2. The Contact Operation Counter will operate when the I/O power is ON
The method used to set values from the DeviceNet Configurator (Ver. 2.20 or
later) is described here.
1. Turn ON the power to the DRT2-series Smart Slave.
2. From the Main Window, open the Network Configuration Window and dou-
3. Select the IN Tab.
4. Double-click the I/O Comment field of the applicable contact to display the
• Counting unit: One operation
Number of
operations
used at the same time for a single contact. Select the function to be used
under the Detection Mode heading.
only.
ble-click or click the right mouse button over the icon of the DRT2-series
Smart Slave to be set. Select Parameter and Edit to display the Edit De-
vice Parameters Window.
From the Maintenance Mode Window, click the right mouse button over the
icon of the DRT2-series Smart Slave to be set. Select Parameter and Edit
to display the Edit Device Parameters Window.
following window. Select Count under Detection Mode, enter a value in the
Slave
Output device
(relay, etc.)
I/O power
Recorded in the Slave
Number of times output
contact changes to ON.
1
Section 4-3
2
3
65