DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 93

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Functions of General-purpose Slaves and Environment-resistive Slaves
4-3-7
Function Overview
72
Sensor Disconnected Detection
3. Select the Operation Time Tab.
4. Double-click the Equipment Name field of the applicable device to display
5. Check that the value set in the Operation Time field is reflected in the Edit
6. Click the OK Button.
DRT2-ID@@C-1, DRT2-ID@@SLH-1, and DRT2-MD32SLH-1
The I/O power supply current can be monitored and, for Screw-less Clamp
Terminals, a sensor disconnection will be detected if the current drops to
0.3 mA or lower per input connector (0.5 mA or lower, at 2 contacts per con-
nector for an Environment-resistive 16-point Input Terminal). The connector
that has a disconnected contact can be checked according to the LED indica-
tors on the Slave Unit. (Refer to the information below.)
the following window.
Enter the set value in the Operation Time field and select the monitor con-
tact numbers for the starting point and ending point from the pull-down
menu. The edge pattern can be set for monitoring at either the ON edge or
the OFF edge. Finally click the OK Button.
Device Parameters Window. Select the General Tab, click the Download
Button, and then click the Reset Button to reset the Unit.
Section 4-3