DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 199

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Connector Terminals with Transistors
Mounting Parallel to a
Panel Using a
Mounting Bracket
Mounting Method
178
1,2,3...
Note A multi-drop DeviceNet connector cannot be used if the Remote I/O Terminal
Note The multi-drop wiring connector cannot be used if the Remote I/O Terminal is
A Remote I/O Terminal with a Connector can be mounted parallel to a panel
by using the SRT2-ATT02 Mounting Bracket B (sold separately).
is mounted parallel to the panel.
Use the following procedure to mount the Remote I/O Terminal.
1. Mount the SRT2-ATT02 Mounting Bracket B to the wall using two Phillip’s
2. Mount the Remote I/O Terminal to the Mounting Bracket B. The Mounting
mounted parallel to the panel.
screws as shown below.
Bracket B is shaped like a DIN Track. Use the same mounting procedure
as for DIN Track.
Panel surface
Mounted parallel
to a panel
Mounting Bracket B
Section 5-6