DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 336

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

7-4
7-4-1
General Specifications
Performance Specifications
DRT2-AD04
Analog Input Terminals
Communications power sup-
ply voltage
Current consumption
Noise immunity
Vibration resistance
Shock resistance
Dielectric strength
Ambient temperature
Ambient humidity
Operating environment
Storage temperature
Mounting
Mounting strength
Screw tightening torque
Weight
Input points
Input signal range
Input range setting method
Maximum signal input
Input impedance
Resolution
Overall accuracy
Analog conversion cycle
AD conversion data
Isolation method
Analog Input Terminals
DRT2-AD04 and DRT2-AD04H Analog Input Terminals
Item
Item
25°C
–10 to 55°C
11 to 25 V DC (Supplied from the communications connector.)
DRT2-AD04:
DRT2-AD04H: 70 mA max. (24 V DC)
Conforms to IEC61000-4-4. 2 kV (power lines)
10 to 150 Hz, 0.7-mm double amplitude
150 m/s
500 V AC for 1 min. with 1-mA sensing current (between isolated circuits)
–10 to +55°C
25% to 85% (with no condensation)
No corrosive gases
–25 to +65°C
35-mm DIN Track mounting
50 N
In the direction of the Track: 10 N
M3 (power supply, I/O terminals): 0.5 N·m
DRT2-AD04:
DRT2-AD04H: 160 g max.
2
4 points (Inputs 0 to 3)
0 to 5 V
1 to 5 V
0 to 10 V
–10 to 10 V
• DIP switch: Inputs 0 and 1 share same setting, and Inputs 2 and 3 share same
• Configurator: Inputs 0 to 3 set separately.
±
1 M Ω min.
1/6,000 (full scale)
±
±
4 ms max./ 4 points
Note When the DeviceNet communications cycle is 4 ms and math operations
–10 to 10 V range: F448 to 0BB8 hex full scale (–3,000 to 3,000)
Other ranges: 0000 to 1770 hex full scale (0 to 6,000)
AD conversion range:
Photocoupler isolation (between input and communications lines)
No isolation between input signal wires
15 V
0.3% FS
0.6% FS
setting.
are not used.
90 mA max. (24 V DC)
170 g max.
Voltage input
±
5% FS of the above data ranges.
Specifications
Specifications
0 to 20 mA
4 to 20 mA
±
Approximately 250 Ω
±
±
30 mA
0.4% FS
0.8% FS
Current input
Section 7-4
315