DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 390

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

User Scaling
Offset Compensation
Analog Output Terminals
Note Reverse scaling, where the 0% scaling value is higher than the 100% scaling
Note The offset value can be set even when using default scaling.
User scaling allows analog output values to be scaled to user-defined values.
The conversion values for 100% and 0% are set using the Configurator.
value, is also supported.
Offset compensation is used to compensate for error that occurs during scal-
ing. The offset amount is added to the scaled line before processing, as
shown in the following diagram. The offset (error) value can be input between
–
100% or 0% output will not be possible. The High Limit is 7FFE hex and the
Low Limit is 8000 hex.
0% value set by user
(scaling point 1)
Upper limit 7FFE
100%
0%
Off-wire
28,000 and 28,000, but if underflow or overflow occurs in the scaled line, the
100% value set by
user (scaling point 2)
range
Input
100% scaling value
Set using Configurator (–28,000 to 28,000)
Set using Configurator (–28,000 to 28,000)
---
0 to 5 V
Scaling value
---
0 to 10 V
Output conversion
0%
7FFF hex
Cannot output 100%
value even if set to
7FFF)
1 to 5 V
0%
---
–10 to
10 V
100%
100%
---
Output signal range
20 mA
Output (signal) range
0 to
Offset value
(–28,000 to
+28,000)
Section 7-5
Scaling line
7FFF hex
20 mA
4 to
369