DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 19

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5
xx
Application Precautions
Application Precautions
Observe the following precautions when using the DeviceNet Smart Slave.
• Fail-safe measures must be taken by the customer to ensure safety in the
• Provide external interlock circuits, limit circuits, and other safety circuits in
• Mount the Unit to a DIN Track or mount it with screws.
• If the system is installed at a site with poor power supply conditions, take
• Provide circuit breakers and other safety measures to provide protection
• Always ground the system to 100 Ω or less when installing the system to
• Always turn OFF the communications power supply and the power sup-
• Do not attempt to disassemble, repair, or modify any Units.
• Be sure that all the terminal screws are tightened to the torque specified
• Be sure that all the mounting screws and cable connector screws are
• Do not remove the label from a Unit before wiring. Always remove the
• Use crimp terminals for wiring. Do not connect bare stranded wires
• Double-check all switch settings and wiring before turning ON the power
• Always follow the electrical specifications for terminal polarity, communi-
• Be sure to wire the Unit correctly.
• Be sure to wire terminals with the correct polarity.
• Be sure that the communications cable connectors and other items with
• Do not drop the Unit or subject the Unit to excessive vibration or shock.
• Use the special packing box when transporting the Unit. Ensure that the
event of incorrect, missing, or abnormal signals caused by broken signal
lines, momentary power interruptions, or other causes.
addition to any provided within the PLC to ensure safety.
appropriate measures to ensure that the power supply remains within the
rated voltage and frequency specifications.
against shorts in external wiring.
protect against electrical shock.
plies to the PLC and Slaves before attempting any of the following.
in the relevant manuals. Loose screws may cause fire, malfunction, or
damage the Unit.
tightened to the torque specified in the relevant manuals.
label after completing wiring, however, to ensure proper heat dispersion.
directly to terminals.
supply.
cations path wiring, power supply wiring, and I/O jumpers. Incorrect wiring
can cause failures.
locking devices are properly locked into place.
Doing so may cause malfunction or damage to the Unit.
product is handled carefully so that no excessive vibration or impact is
applied to the product during transportation.
• Mounting or removing a Unit such as an I/O Unit, CPU Unit, Memory
• Mounting or removing Remote I/O Terminal circuit sections.
• Assembling any devices or racks.
• Setting rotary switches.
• Connecting or wiring cables.
• Connecting or disconnecting connectors.
Cassette, or Master Unit.
5