DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 458

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Adjustment Procedure for the DRT2-TS04P
Connecting the Devices
required for DRT2-TS04P
Adjustment
Temperature Input Terminals
Note The only sensors that can be adjusted are ones that operate while the power
■ Six-dial Resistance Box and Precision Digital Multimeter
■ DeviceNet Configurator (Version 2.40 or Higher)
supply is ON. When adjusting for sensors that are not presently in use,
change the input type setting and perform the adjustment procedure from the
beginning of the flowchart.
The following paragraphs explain how to connect the devices that must be
connected to the DRT2-TS04T for user adjustment. Wire the following devices
properly when adjusting the DRT2-TS04T.
Used to make adjustments at the upper limit and lower limit.
Prepare device that can provide accurate resistance values for measurement.
Use a precision digital multimeter that can measure the resistance values and
indicate when the six-dial resistance box is not producing an accurate resis-
tance.
The actual adjustment operations are performed with the Configurator. Check
the version of the Configurator, because the DRT2-TS04P cannot be adjusted
with an old version.
Refer to the DeviceNet Configurator Operation Manual for details on the Con-
figurator.
Connect the device that requires adjustment.
To make the upper/lower limit adjustment, connect
a six-dial resistance box to the Temperature Input
Terminal that is being adjusted.
Turn ON the power to the associated system
devices. Wait at least 30 minutes for the
internal temperature to stabilize.
Set the input's lower limit adjustment value.
Set the input's upper limit adjustment value.
Test indication accuracy after adjustment.
Yes
Prepare the device that requires adjustment.
No
Adjust other
inputs?
End
Section 7-6
437