DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 168

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Connector Terminals with Transistors
Note When connecting the sensor, insert the wire so that the terminal number on
Note To remove a wire, push in the operation lever, check that the operation lever
2. Insert the line all the way to the back of the wire insertion opening. Check
3. Insert a flat-blade screwdriver into the reset opening and pull back the lever
4. Check that the operation lever has returned to its position. Lightly pull on
the cover matches the sensor wire color, as shown in the following table.
has locked, and then pull out the wire. After removing the wire, always return
the operation lever to its normal position.
Terminal
number
1
2
3
4
that the sheath of the line is inserted into the wire insertion opening, and
that the end of the conductor has passed through the connection part.
lightly. A click sound will be heard and the operation lever will return to its
normal position.
the lines, and if there is any resistance, they are connected properly.
Note Wire colors have been changed according to revisions in the JIS
Connection part
Operation lever
(white)
standards for photoelectric and proximity sensors. The colors in pa-
rentheses are the wire colors prior to the revisions.
3-wire sensor
(without self-
diagnostic out-
put function)
Brown (red)
---
Blue (black)
Black (white)
Using DRT2-ID16S
Reset opening
Wire sheath
2-wire sensor
(without self-
diagnostic out-
put function)
---
---
Blue (black)
Brown (white)
Blue (black)
3-wire sensor
(without self-
diagnostic out-
put function)
Brown (red)
---
Black (white)
Using DRT2-ID16S-1
Wire insertion opening
2-wire sensor
(without self-
diagnostic out-
put function)
---
---
Brown (white)
Blue (black)
Section 5-6
147