PIC32MX460F512L-80I/PT Microchip Technology, PIC32MX460F512L-80I/PT Datasheet - Page 365

• Manufacturer Part Number: PIC32MX460F512L-80I/PT
• Description: IC PIC MCU FLASH 512K 100-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX460F512L-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 100-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX4xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 5 x 16 bit, 1 x 32 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320003, DM320002, MA320002
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 85
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 6
• Embedded Interface Type: EUART, I2C, PSP, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1000 - PIC32 BREAKOUT BOARDAC244003 - TEST BD MPLAB REAL ICE LOOPBACKDM320003 - BOARD DEMO USB PIC32 OTGAC244006 - KIT MPLAB REAL ICE TRACEAC164333 - MODULE SKT FOR PM3 100QFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 16-1:
© 2008 Microchip Technology Inc.
bit 31
bit 23
bit 15
bit 7
Legend:
R = Readable bit
U = Unimplemented bit
bit 31-16
bit 15
bit 14
bit 13
bit 12-6
bit 5
bit 4
bit 3
Note 1:
R/W-0
ON
r-x
r-x
r-x
—
—
—
2:
FRZ is writable in Debug Exception mode only, it is forced to read ‘0’ in Normal mode.
Reads as ‘0’ in modes other than PWM mode.
Reserved: Maintain as ‘0’; ignore read
ON: Output Compare Peripheral On bit
1 = Output compare peripheral is enabled. The status of other bits in the register are not affected by
0 = Output compare peripheral is disabled and not drawing current. SFR modifications are allowed.
FRZ: Freeze in Debug Exception Mode bit
1 = Freeze operation when CPU enters in Debug Exception mode
0 = Continue operation when CPU enters in Debug Exception mode
SIDL: Stop in Idle Mode bit
1 = Discontinue operation when CPU enters in Idle mode
0 = Continue operation in Idle mode
Reserved: Maintain as ‘0’; ignore read
OC32: 32-Bit Compare Mode bit
1 = OCxR<31:0> and/or OCxRS<31:0> are used for comparisions to the 32-bit timer source
0 = OCxR<15:0> and OCxRS<15:0> are used for comparisons to the 16-bit timer source
OCFLT: PWM Fault Condition Status bit
1 = PWM Fault condition has occurred (cleared in HW only)
0 = No PWM Fault condition has occurred
OCTSEL: Output Compare Timer Select bit
1 = Timer3 is the clock source for compare x
0 = Timer2 is the clock source for compare x
Note:
Note:
R/W-0
FRZ
setting this bit
The status of other bits in this register are not affected by clearing this bit
r-x
r-x
r-x
—
—
—
OCxCON: OUTPUT COMPARE x CONTROL REGISTER
(This bit is only used when OCM<2:0> = 111.
OCTSEL must be set to ‘1’ when using 32-bit mode (OC32 = 1)
W = Writable bit
-n = Bit Value at POR: (‘0’, ‘1’, x = Unknown)
R/W-0
R/W-0
OC32
SIDL
r-x
r-x
—
—
OCFLT
Preliminary
R-0
r-x
r-x
r-x
—
—
—
(2)
(1)
P = Programmable bit
OCTSEL
R/W-0
r-x
r-x
r-x
—
—
—
PIC32MX3XX/4XX
R/W-0
r-x
r-x
r-x
—
—
—
r = Reserved bit
OCM<2:0>
R/W-0
r-x
r-x
r-x
—
—
—
DS61143C-page 363
R/W-0
r-x
r-x
r-x
—
—
—
bit 24
bit 16
bit 8
bit 0