PIC32MX460F512L-80I/PT Microchip Technology, PIC32MX460F512L-80I/PT Datasheet - Page 426

• Manufacturer Part Number: PIC32MX460F512L-80I/PT
• Description: IC PIC MCU FLASH 512K 100-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX460F512L-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 100-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX4xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 5 x 16 bit, 1 x 32 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320003, DM320002, MA320002
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 85
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 6
• Embedded Interface Type: EUART, I2C, PSP, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1000 - PIC32 BREAKOUT BOARDAC244003 - TEST BD MPLAB REAL ICE LOOPBACKDM320003 - BOARD DEMO USB PIC32 OTGAC244006 - KIT MPLAB REAL ICE TRACEAC164333 - MODULE SKT FOR PM3 100QFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC32MX3XX/4XX
REGISTER 19-2:
DS61143C-page 424
bit 31
bit 23
bit 15
bit 7
Legend:
R = Readable bit
U = Unimplemented bit
bit 31-25
bit 24
bit 23-16
bit 15-14
bit 13
bit 12
bit 11
R/W-0
R/W-0
R/W-0
r-x
—
URXISEL<1:0>
UTXISEL<1:0>
Reserved: Maintain as ‘0’; ignore read
ADM_EN: Automatic Address Detect Mode Enable bit
1 = Automatic Address Detect Mode is enabled
0 = Automatic Address Detect Mode is disabled
ADDR<7:0>: Automatic Address Mask bits
UTXISEL<1:0>: Tx Interrupt Mode Selection bits
11 = Reserved, do not use
10 = Interrupt is generated when the Transmit buffer becomes empty
01 = Interrupt is generated when all characters are transmitted
00 = Interrupt is generated when the Transmit buffer contains at least one empty space
UTXINV: Transmit Polarity Inversion bit
If IrDA mode is disabled (i.e., IREN (UxMOD<12>) is ‘0’)
1 = UxTX idle state is ‘0’
0 = UxTX idle state is ‘1’
If IrDA mode is enabled (i.e., IREN (UxMOD<12>) is ‘1’)
1 = IrDA encoded UxTX idle state is ‘1’
0 = IrDA encoded UxTX idle state is ‘0’
URXEN: Receiver Enable bit
1 = UARTx receiver is enabled, UxRX pin controlled by UARTx (if ON = 1)
0 = UARTx receiver is disabled, the UxRX pin is ignored by the UARTx module. UxRX pin controlled
UTXBRK: Transmit Break bit
1 = Send BREAK on next transmission - Start bit followed by twelve ‘0’ bits, followed by Stop bit;
0 = BREAK transmission is disabled or completed
R/W-0
R/W-0
R/W-0
When ADM_EN bit is ‘1’, this value defines the bits that are don’t care when comparing incoming
address reception
by PORT.
cleared by hardware upon completion
r-x
—
UxSTA: UARTx STATUS REGISTER
W = Writable bit
-n = Bit Value at POR: (‘0’, ‘1’, x = Unknown)
UTXINV
ADDEN
R/W-0
R/W-0
R/W-0
r-x
—
URXEN
R/W-0
R/W-0
RIDLE
Preliminary
R-1
r-x
—
ADDR<7:0>
P = Programmable bit
UTXBRK
R/W-0
R/W-0
PERR
R-0
r-x
—
UTXEN
R/W-0
R/W-0
FERR
R-0
r-x
—
© 2008 Microchip Technology Inc.
r = Reserved bit
UTXBF
OERR
R/W-0
R/C-0
R-0
r-x
—
ADM_EN
R/W-0
R/W-0
TRMT
RXDA
R-1
R-0
bit 24
bit 16
bit 8
bit 0