MC9S12NE64CPV Freescale Semiconductor, MC9S12NE64CPV Datasheet - Page 94

• Manufacturer Part Number: MC9S12NE64CPV
• Description: IC MCU 25MHZ ETHERNT/PHY 112LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12NE64CPV

• Mfg Application Notes: MC9S12NE64 Integrated Ethernet Controller Implementing an Ethernet Interface with the MC9S12NE64 Web Server Development with MC9S12NE64 and Open TCP
• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.375 V ~ 3.465 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 16 bit
• Operating Supply Voltage: - 0.3 V to + 3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 65 C
• On-chip Adc: 10 bit
• For Use With: EVB9S12NE64E - BOARD EVAL FOR 9S12NE64DEMO9S12NE64E - DEMO BOARD FOR 9S12NE64
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Chapter 2 64 Kbyte Flash Module (S12FTS64KV3)
2.4.1.3.3
The program command is used to program a previously erased word in the Flash memory using an
embedded algorithm. If the word to be programmed is in a protected area of the Flash block, the PVIOL
flag in the FSTAT register will set and the program command will not launch. After the program command
has successfully launched, the CCIF flag in the FSTAT register will set after the program operation has
completed unless a second command has been buffered.
A summary of the launching of a program operation is shown in
94
Clock Register
Loaded
Check
Program Command
Protection
Violation Check
Access
Error Check
Address, Data,
Command
Buffer Empty Check
Bit Polling for
Command
Completion Check
Read: Register FCLKDIV
1.
2.
3.
Bit FDIVLD set?
Figure 2-24. Example Program Command Flow
yes
Write: Flash Address and
Program Data
Program Command 0x20
Write: Register FSTAT
Clear bit CBEIF 0x80
Write: Register FCMD
Read: Register FSTAT
no
no
no
yes
ACCERR
MC9S12NE64 Data Sheet, Rev. 1.1
PVIOL
CBEIF
Set?
CCIF
Set?
EXIT
Write: Register FCLKDIV
Set?
Bit
Set?
Bit
Bit
Bit
no
yes
yes
yes
no
Clear bit PVIOL 0x20
Write: Register FSTAT
Clear bit ACCERR 0x10
Write: Register FSTAT
NOTE: command write sequence
aborted by writing 0x00 to
FSTAT register.
NOTE: command write sequence
aborted by writing 0x00 to
FSTAT register.
Read: Register FSTAT
Figure
2-24.
Next Write?
yes
no
Freescale Semiconductor