DF70844AD80FPV Renesas Electronics America, DF70844AD80FPV Datasheet - Page 987

• Manufacturer Part Number: DF70844AD80FPV
• Description: IC SUPERH MCU FLASH 112LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7080r

Specifications of DF70844AD80FPV

• Core Size: 32-Bit
• Program Memory Size: 256KB (256K x 8)
• Core Processor: SH-2
• Speed: 80MHz
• Connectivity: EBI/EMI, FIFO, I²C, SCI, SSU
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• No. Of I/o's: 76
• Ram Memory Size: 16KB
• Cpu Speed: 80MHz
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 3V To 3.6V, 4.5V To 5.5V
• Embedded Interface Type: I2C, SCI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: R0K570865S001BE - KIT STARTER FOR SH7086R0K570865S000BE - KIT STARTER FOR SH7086HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

18.4.5
In slave receive mode, the master device outputs the transmit clock and transmit data, and the
slave device returns an acknowledge signal. For slave receive mode operation timing, refer to
figures 18.11 and 18.12. The reception procedure and operations in slave receive mode are
described below.
1. Set the ICE bit in ICCR1 to 1. Set the MLS bit in ICMR and bits CKS3 to CKS0 in ICCR1.
2. When the slave address matches in the first frame following detection of the start condition,
3. Read ICDRR every time RDRF is set. If 8th receive clock pulse falls while RDRF is 1, SCL is
4. The last byte data is read by reading ICDRR.
(Master output)
(Master output)
(Initial setting) Set the MST and TRS bits in ICCR1 to select slave receive mode, and wait
until the slave address matches.
the slave device outputs the level specified by ACKBT in ICIER to SDA, at the rise of the 9th
clock pulse. At the same time, RDRF in ICSR is set to read ICDRR (dummy read). (Since the
read data show the slave address and R/W, it is not used.)
fixed low until ICDRR is read. The change of the acknowledge before reading ICDRR, to be
returned to the master device, is reflected to the next transmit frame.
(Slave output)
(Slave output)
processing
ICDRS
ICDRR
RDRF
User
SCL
SDA
SDA
SCL
Slave Receive Operation
Figure 18.11 Slave Receive Mode Operation Timing (1)
[2] Read ICDRR (dummy read)
A
9
Bit 7
1
Data 1
Bit 6
2
Bit 5
3
Bit 4
4
Bit 3
5
Rev. 3.00 May 17, 2007 Page 929 of 1582
Bit 2
6
Section 18 I
Bit 1
7
Bit 0
2
8
C Bus Interface 2 (I
[2] Read ICDRR
REJ09B0181-0300
A
9
Bit 7
Data 1
1
Data 2
2
C2)