DF2268FA13V Renesas Electronics America, DF2268FA13V Datasheet - Page 225

• Manufacturer Part Number: DF2268FA13V
• Description: IC H8S/2268 MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of DF2268FA13V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 13MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: LCD, POR, PWM, WDT
• Number Of I /o: 67
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

9.8.7
Port J has a built-in input pull-up MOS function that can be controlled by software. Input pull-up
MOS can be specified as on or off on an individual bit basis.
When port J is set to port input and wakeup input, PJDDR is cleared to 0, and then PJPCR is set to
1, the input pull-up MOS is turned on.
The input pull-up MOS function is in the off state after a reset, and in hardware standby mode.
The prior state is retained in software standby mode.
Table 9.2 summarizes the input pull-up MOS states in port J.
Table 9.2
Pin States
Segment output and
port output
Port input and wakeup
input
Legend:
OFF
ON/OFF : On when PJDDR = 0 and PJPCR = 1; otherwise off.
9.9
Port K is an 8-bit I/O port and has the following registers.
• Port K data direction register (PKDDR)
• Port K data register (PKDR)
• Port K register (PORTK)
Port K
Input Pull-Up MOS Function
: Input pull-up MOS is always off.
Input Pull-Up MOS States (Port J)
Reset
OFF
Hardware
Standby Mode
OFF
Rev. 5.00 Sep. 01, 2009 Page 173 of 656
Software
Standby Mode
OFF
ON/OFF
Section 9 I/O Ports
In Other
Operations
OFF
ON/OFF
REJ09B0071-0500