UPD78F0537DGA(T)-9EV-A NEC, UPD78F0537DGA(T)-9EV-A Datasheet - Page 714

• Manufacturer Part Number: UPD78F0537DGA(T)-9EV-A
• Description: 8BIT MCU, 128K FLASH, 7KB RAM, SMD
• Manufacturer: NEC

Specifications of UPD78F0537DGA(T)-9EV-A

• Controller Family/series: UPD78
• No. Of I/o's: 55
• Ram Memory Size: 7KB
• Cpu Speed: 20MHz
• No. Of Timers: 8
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 128KB
• Oscillator Type: External, Internal

A.5.2 When using on-chip debug emulator QB-78K0MINI
A.5.3 When using on-chip debug emulator with programming function QB-MINI2
714
Part Number
QB-78K0KX2-ZZZ
QB-78K0KX2-T64GB
QB-78K0KX2-T64GC
QB-78K0KX2-T64GK
QB-78K0KX2-T64GA
QB-78K0KX2-T64FC
QB-78K0MINI
On-chip debug emulator
Target connector
specifications
QB-MINI2
On-chip debug emulator with
programming function
Target connector specifications
Remark 2. The packed contents differ depending on the part number, as follows.
Remark The QB-78K0MINI is supplied with a USB interface cable, and a connection cable. As control software,
Remark 1. The QB-MINI2 is supplied with a USB interface cable and connection cables (10-pin cable and 16-pin
Packed Contents
the integrated debugger ID78K0-QB is supplied.
2. Download the software for operating the QB-MINI2 from the download site for development tools
cable), and the 78K0-OCD board. A connection cable (10-pin cable) and the 78K0-OCD board are
used only when using the on-chip debug function.
(http://www.necel.com/micro/ods/eng/index.html).
In-Circuit Emulator
QB-78K0KX2
This on-chip debug emulator serves to debug hardware and software when developing
application systems using the 78K0/Kx2. It supports the integrated debugger (ID78K0-QB). This
emulator should be used in combination with a connection cable and a USB interface cable that is
used to connect the host machine.
10-pin general-purpose connector (2.54 mm pitch)
This on-chip debug emulator serves to debug hardware and software when developing
application systems using the 78K0/Kx2. It is available also as flash memory
programmer dedicated to microcontrollers with on-chip flash memory. When using this
as on-chip debug emulator, it should be used in combination with a connection cable (10-
pin cable or 16-pin cable), a USB interface cable that is used to connect the host
machine, and the 78K0-OCD board.
10-pin general-purpose connector (2.54 mm pitch) or 16-pin general-purpose connector
(2.54 mm pitch)
APPENDIX A DEVELOPMENT TOOLS
None
QB-80-EP-01T
Emulation Probe
User’s Manual U17260EJ6V0UD
Exchange Adapter
QB-64GB-EA-04T
QB-64GC-EA-03T
QB-64GK-EA-04T
QB-64GA-EA-01T
QB-64FC-EA-01T
QB-64GB-YQ-01T
QB-64GC-YQ-01T
QB-64GK-YQ-01T
QB-64GA-YQ-01T
None
YQ Connector
QB-64GB-NQ-01T
QB-64GC-NQ-01T
QB-64GK-NQ-01T
QB-64GA-NQ-01T
QB-64FC-NQ-01T
Target Connector