C8051F020DK Silicon Laboratories Inc, C8051F020DK Datasheet - Page 83

• Manufacturer Part Number: C8051F020DK
• Description: DEV KIT FOR F020/F021/F022/F023
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F020DK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051F02x
• Interface Type: USB
• Silicon Manufacturer: Silicon Labs
• Core Architecture: 8051
• Silicon Core Number: C8051F020
• Silicon Family Name: C8051F02x
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: Silicon Laboratories C8051 F020/021/022/023
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1200

8.
Each C8051F020/1/2/3 device includes two on-chip 12-bit voltage-mode Digital-to-Analog Converters (DACs).
Each DAC has an output swing of 0V to (VREF-1LSB) for a corresponding input code range of 0x000 to 0xFFF. The
DACs may be enabled/disabled via their corresponding control registers, DAC0CN and DAC1CN. While disabled,
the DAC output is maintained in a high-impedance state, and the DAC supply current falls to 1 µA or less. The volt-
age reference for each DAC is supplied at the VREFD pin (C8051F020/2 devices) or the VREF pin (C8051F021/3
devices). Note that the VREF pin on C8051F021/3 devices may be driven by the internal voltage reference or an
external source. If the internal voltage reference is used it must be enabled in order for the DAC outputs to be valid.
See
ENCE (C8051F021/3)” on page 93
8.1.
Each DAC features a flexible output update mechanism which allows for seamless full-scale changes and supports
jitter-free updates for waveform generation. The following examples are written in terms of DAC0, but DAC1 opera-
tion is identical. Note that reads from DAC0L return pre-latch data, meaning the value read is the same as the last
value written to this register, not the value at the DAC0L latch. Reads from DAC0H always return the value at the
DAC0H latch.
Section “9. VOLTAGE REFERENCE (C8051F020/2)” on page 91
DACS, 12-BIT VOLTAGE MODE
DAC Output Scheduling
DAC0MD1
DAC0MD0
DAC1MD1
DAC1MD0
DAC0DF2
DAC0DF1
DAC0DF0
DAC1DF2
DAC1DF1
DAC1DF0
DAC0EN
DAC1EN
Figure 8.1. DAC Functional Block Diagram
8
8
8
8
for more information on configuring the voltage reference for the DACs.
8
8
8
8
12
12
REF
REF
Rev. 1.4
DAC0
DAC1
or
Section “10. VOLTAGE REFER-
C8051F020/1/2/3
AGND
AGND
AV+
AV+
DAC0
DAC1
83