ST72C334J4T6 STMicroelectronics, ST72C334J4T6 Datasheet - Page 104

• Manufacturer Part Number: ST72C334J4T6
• Description: MCU 8BIT FLASH SPI SCI 44TQFP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72C334J4T6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 3.2 V ~ 5.5 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Processor Series: ST72C3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4 bit
• Operating Supply Voltage: 3.2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7C334-INDART, ST7MDT2-EPB2/US
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-4838

ST72334J/N, ST72314J/N, ST72124J
15.2 INSTRUCTION GROUPS
The ST7 family devices use an Instruction Set
consisting of 63 instructions. The instructions may
Using a pre-byte
The instructions are described with one to four
bytes.
In order to extend the number of available op-
codes for an 8-bit CPU (256 opcodes), three differ-
ent prebyte opcodes are defined. These prebytes
modify the meaning of the instruction they pre-
cede.
The whole instruction becomes:
104/153
Load and Transfer
Stack operation
Increment/Decrement
Compare and Tests
Logical operations
Bit Operation
Conditional Bit Test and Branch
Arithmetic operations
Shift and Rotates
Unconditional Jump or Call
Conditional Branch
Interruption management
Condition Code Flag modification
PC-2 End of previous instruction
PC-1 Prebyte
PC
PC+1 Additional word (0 to 2) according to the
Opcode
number of bytes required to compute the
effective address
LD
PUSH
INC
CP
AND
BSET
BTJT
ADC
SLL
JRA
JRxx
TRAP
SIM
CLR
POP
DEC
TNZ
OR
BRES
BTJF
ADD
SRL
JRT
WFI
RIM
be subdivided into 13 main groups as illustrated in
the following table:
These prebytes enable instruction in Y as well as
indirect addressing modes to be implemented.
They precede the opcode of the instruction in X or
the instruction using direct addressing mode. The
prebytes are:
RSP
BCP
XOR
SUB
SRA
JRF
HALT
SCF
PDY 90 Replace an X based instruction using
PIX 92 Replace an instruction using direct, di-
PIY 91 Replace an instruction using X indirect
CPL
SBC
RLC
JP
IRET
RCF
immediate, direct, indexed, or inherent
addressing mode by a Y one.
rect bit, or direct relative addressing
mode to an instruction using the corre-
sponding indirect addressing mode.
It also changes an instruction using X
indexed addressing mode to an instruc-
tion using indirect X indexed addressing
mode.
indexed addressing mode by a Y one.
NEG
MUL
RRC
CALL
SWAP
CALLR
SLA
NOP
RET