UPD70F3737GF-GAS-AX Renesas Electronics America, UPD70F3737GF-GAS-AX Datasheet - Page 913

• Manufacturer Part Number: UPD70F3737GF-GAS-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GF-GAS-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Notes 1. Corresponding pins when CSIB3 is used.
Caution Do not input a high level to the DRST pin.
Remarks 1. The pins that are not used in flash memory programming remain in the same status as that
2. Wire the FLMD1 pin as shown below (recommended), or connect it to GND via a pull-down resistor on
3. Create an oscillator on the flash writing adapter (shown in broken lines) and supply a clock.
4. Corresponding pins when UARTA0 is used.
Figure 30-6. Wiring Example of V850ES/JG3-L Flash Writing Adapter (FA-100GF-GAS-B)
2. This adapter is for a 100-pin plastic LQFP package.
board.
Here is an example of the oscillator.
Example:
immediately after a reset ends. Handle the pins not shown in accordance with the handling of
unused pins (see 2.3 Pin I/O Circuit Types, I/O Buffer Power Supplies, and Connection of
Unused Pins).
CHAPTER 30 FLASH MEMORY
(in CSIB0 + HS Mode) (2/2)
User’s Manual U18953EJ5V0UD
X1
X2
911