MC68030CRC33C Freescale Semiconductor, MC68030CRC33C Datasheet - Page 76

• Manufacturer Part Number: MC68030CRC33C
• Description: IC MPU 32BIT ENHANCED 128-PGA
• Manufacturer: Freescale Semiconductor

Specifications of MC68030CRC33C

• Processor Type: M680x0 32-Bit
• Speed: 33MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 128-PGA
• Family Name: M68000
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 33MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 5V
• Operating Supply Voltage (max): 5.25V
• Operating Supply Voltage (min): 4.75V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Through Hole
• Pin Count: 128
• Package Type: PGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

MOTOROLA
2.6.2 General Addressing M o d e S u m m a r y
The postindexed indirect mode with outer displacement (see Figure 2-14)
the data item within the selected data structure.
uses the contents of An as an index to the pointer list at the displacement.
Register Xn is used as an index to the structure of data structures at the
address in the pointer. The outer displacement (od) is the displacement of
The addressing modes described in the previous section are derived from
specific combinations of options in the indexing mode or a selection of two
alternate addressing modes. For example, the addressing mode called reg-
the effective address specification. Assigning an address register as Rn pro-
vides higher performance than using a data register as Rn. Another case is
with the index register suppressed.
ister indirect (Rn) assembles as the address register indirect if the register is
an address register. If Rn is a data register, the assembler uses the address
register indirect with index mode using the data register as the indirect reg-
ister and suppresses the address register by setting the base suppress bit in
(bd,An), which selects an addressing mode depending on the size of the
displacement. If the displacement is 16 bits or less, the address register
indirect with displacement mode (d16,An) is used. When a 32-bit displace-
ment is required, the address register indirect with index (bd,An,Xn) is used
Figure 2-14. Postindexed Indirect Addressing with Outer Displacement
bd
MC68030 USER'S MANUAL
POINTER LIST
POINTER
An
SYNTAX: ([bd, An],Xn,od)
L
/
L
WITH OUTER DISPLACEMENT
POST-INDEXED STRUCTURE
DATA ITEM
od
Xn
I
L
I
2-31