ATMEGA324P-A15MZ Atmel, ATMEGA324P-A15MZ Datasheet - Page 24

• Manufacturer Part Number: ATMEGA324P-A15MZ
• Description: MCU AVR 32KB FLASH 15MHZ 44-VQFN
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA324P-A15MZ

• Package / Case: 44-VQFN Exposed Pad
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Speed: 16MHz
• Number Of I /o: 32
• Eeprom Size: 1K x 8
• Core Processor: AVR
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Program Memory Size: 32KB (32K x 8)
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Connectivity: I²C, SPI, UART/USART
• Core Size: 8-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

System Clock
and Clock
Options
Clock Systems
and their
Distribution
CPU Clock – clk
I/O Clock – clk
Flash Clock – clk
Asynchronous Timer
Clock – clk
24
ATmega32(L)
ASY
I/O
CPU
FLASH
Figure 11
need not be active at a given time. In order to reduce power consumption, the clocks to modules
not being used can be halted by using different sleep modes, as described in
ment and Sleep Modes” on page
Figure 11. Clock Distribution
The CPU clock is routed to parts of the system concerned with operation of the AVR core.
Examples of such modules are the General Purpose Register File, the Status Register and the
data memory holding the Stack Pointer. Halting the CPU clock inhibits the core from performing
general operations and calculations.
The I/O clock is used by the majority of the I/O modules, like Timer/Counters, SPI, and USART.
The I/O clock is also used by the External Interrupt module, but note that some external inter-
rupts are detected by asynchronous logic, allowing such interrupts to be detected even if the I/O
clock is halted. Also note that address recognition in the TWI module is carried out asynchro-
nously when clk
The Flash clock controls operation of the Flash interface. The Flash clock is usually active simul-
taneously with the CPU clock.
The Asynchronous Timer clock allows the Asynchronous Timer/Counter to be clocked directly
from an external 32 kHz clock crystal. The dedicated clock domain allows using this
Timer/Counter as a real-time counter even when the device is in sleep mode.
Asynchronous
Timer/Counter
Timer/Counter
Oscillator
presents the principal clock systems in the AVR and their distribution. All of the clocks
I/O
is halted, enabling TWI address reception in all sleep modes.
General I/O
Modules
External RC
Oscillator
clk
clk
ASY
I/O
32. The clock systems are detailed
External Clock
ADC
Control Unit
AVR Clock
Multiplexer
clk
Clock
ADC
Source Clock
CPU Core
clk
Oscillator
clk
Crystal
CPU
Reset Logic
FLASH
Watchdog Clock
Crystal Oscillator
RAM
Low-frequency
Watchdog Timer
Figure
Watchdog
Oscillator
11.
Flash and
EEPROM
“Power Manage-
Calibrated RC
Oscillator
2503N–AVR–06/08