D13007VX13V Renesas Electronics America, D13007VX13V Datasheet - Page 570

• Manufacturer Part Number: D13007VX13V
• Description: MCU 3V 0K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of D13007VX13V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 13MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

16. D/A Converter
Bit 0⎯D/A Standby Enable (DASTE): Enables or disables D/A output in software standby
mode.
1
16.3
The D/A converter has two built-in D/A conversion circuits that can perform conversion
independently.
D/A conversion is performed constantly while enabled in DACR. If the DADR0 or DADR1 value
is modified, conversion of the new data begins immediately. The conversion results are output
when bits DAOE0 and DAOE1 are set to 1.
An example of D/A conversion on channel 0 is given next. Timing is indicated in figure 16.2.
1. Data to be converted is written in DADR0.
2. Bit DAOE0 is set to 1 in DACR. D/A conversion starts and DA0 becomes an output pin. The
3. If the DADR0 value is modified, conversion starts immediately, and the result is output after
4. When the DAOE0 bit is cleared to 0, DA0 becomes an input pin.
Rev.5.00 Sep. 12, 2007 Page 540 of 764
REJ09B0396-0500
Bit 0
DASTE
0
converted result is output after the conversion time.
The output value is
Output of this conversion result continues until the value in DADR0 is modified or the
DAOE0 bit is cleared to 0.
the conversion time.
Operation
D/A output is enabled in software standby mode
Description
D/A output is disabled in software standby mode
DADR contents
256
× V
REF
(Initial value)