HD64F3337YCP16 Renesas Electronics America, HD64F3337YCP16 Datasheet - Page 242

• Manufacturer Part Number: HD64F3337YCP16
• Description: IC H8 MCU FLASH 60K 84PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3337YCP16

• Core Processor: H8/300
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 84-PLCC
• Package: 84PLCC
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 74
• Interface Type: HIF/I2C/SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

9.6.4
If identical time constants are written in TCORA and TCORB, causing compare-match A and B to
occur simultaneously, any conflict between the output selections for compare-match A and B is
resolved by following the priority order in table 9.4.
Table 9.4
Output Selection
Toggle
1 output
0 output
No change
9.6.5
When an internal clock source is changed, the changeover may cause the timer counter to
increment. This depends on the time at which the clock select bits (CKS1, CKS0) are rewritten, as
shown in table 9.5.
The pulse that increments the timer counter is generated at the falling edge of the internal clock
source signal. If clock sources are changed when the old source is high and the new source is low,
as in case no. 3 in table 9.5, the changeover generates a falling edge that triggers the TCNT clock
pulse and increments the timer counter.
Switching between an internal and external clock source can also cause the timer counter to
increment.
210
Contention between Compare-Match A and Compare-Match B
Increment Caused by Changing of Internal Clock Source
Priority of Timer Output
Priority
High
Low