HD64F3337YCP16 Renesas Electronics America, HD64F3337YCP16 Datasheet - Page 468

• Manufacturer Part Number: HD64F3337YCP16
• Description: IC H8 MCU FLASH 60K 84PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3337YCP16

• Core Processor: H8/300
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 84-PLCC
• Package: 84PLCC
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 74
• Interface Type: HIF/I2C/SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

20.1.5
Flash memory is controlled by the pins listed in table 20.3.
Table 20.3 Flash Memory Pins
Pin Name
Programming power
Mode 1
Mode 0
Transmit data
Receive data
The transmit data and receive data pins are used in boot mode.
20.1.6
The flash memory is controlled by the registers listed in table 20.4.
Table 20.4 Flash Memory Registers
Name
Flash memory control register
Erase block register 1
Erase block register 2
Wait-state control register*
Notes: *1 The wait-state control register controls the insertion of wait states by the wait-state
Registers FLMCR, EBR1, and EBR2 are only valid when writing to or erasing flash memory, and
can only be accessed while 12 V is being applied to the FV
FV
addresses cannot be modified and always read H'FF.
436
PP
pin, in mode 2 addresses H'FF80 to H'FF83 are external address space, and in mode 3 these
*2 In modes 2 and 3 (on-chip flash memory enabled), the initial value is H'00 for FLMCR,
Input/Output Pins
Register Configuration
controller, frequency division of clock signals for the on-chip supporting modules by the
clock pulse generator, and emulation of flash-memory updates by RAM in on-board
programming mode.
EBR1 and EBR2. In mode 1 (on-chip flash memory disabled), these registers cannot be
modified and always read H'FF.
Abbreviation
FV
MD
MD
TxD
RxD
1
PP
1
0
1
1
Abbreviation
FLMCR
EBR1
EBR2
WSCR
Input/Output
Power supply
Input
Input
Output
Input
R/W
R/W
R/W
R/W
R/W
PP
*2
*2
*2
Function
Apply 12.0 V
H8/3337YF operating mode setting
H8/3337YF operating mode setting
SCI1 transmit data output
SCI1 receive data input
pin. When 12 V is not applied to the
Initial Value
H'00
H'00
H'00
H'08
*2
*2
*2
Address
H'FF80
H'FF82
H'FF83
H'FFC2