HD64F3337YCP16 Renesas Electronics America, HD64F3337YCP16 Datasheet - Page 265

• Manufacturer Part Number: HD64F3337YCP16
• Description: IC H8 MCU FLASH 60K 84PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3337YCP16

• Core Processor: H8/300
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 84-PLCC
• Package: 84PLCC
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 74
• Interface Type: HIF/I2C/SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

12.1
The H8/3337 Series and H8/3397 Series include two serial communication interface channels
(SCI0 and SCI1) for transferring serial data to and from other chips. Either synchronous or
asynchronous communication can be selected.
12.1.1
The features of the on-chip serial communication interface are:
Asynchronous mode
The H8/3337 Series and H8/3397 Series can communicate with a UART (Universal
Asynchronous Receiver/Transmitter), ACIA (Asynchronous Communication Interface
Adapter), or other chip that employs standard asynchronous serial communication. It also has a
multiprocessor communication function for communication with other processors. Twelve data
formats are available.
Synchronous mode
The SCI can communicate with chips able to perform clocked synchronous data transfer.
Full duplex communication
The transmitting and receiving sections are independent, so each channel can transmit and
receive simultaneously. Both the transmit and receive sections use double buffering, so
continuous data transfer is possible in either direction.
Built-in baud rate generator
Any specified bit rate can be generated.
Internal or external clock source
The SCI can operate on an internal clock signal from the baud rate generator, or an external
clock signal input at the SCK0 or SCK1 pin.
Data length: 7 or 8 bits
Stop bit length: 1 or 2 bits
Parity: Even, odd, or none
Multiprocessor bit: 1 or 0
Error detection: Parity, overrun, and framing errors
Break detection: When a framing error occurs, the break condition can be detected by
Data length: 8 bits
Error detection: Overrun errors
reading the level of the RxD line directly.
Overview
Features
Section 12 Serial Communication Interface
233