HD6413008VXI25 Renesas Electronics America, HD6413008VXI25 Datasheet - Page 348

• Manufacturer Part Number: HD6413008VXI25
• Description: MCU 3V 0K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD6413008VXI25

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

10. Programmable Timing Pattern Controller (TPC)
10.3.3
Sample Setup Procedure for Normal TPC Output: Figure 10.4 shows a sample procedure for
setting up normal TPC output.
Rev.4.00 Aug. 20, 2007 Page 302 of 638
REJ09B0395-0400
16-bit timer
setup
16-bit timer
setup
Port and
TPC setup
Normal TPC Output
Figure 10.4 Setup Procedure for Normal TPC Output (Example)
Select counting operation
Select TPC output trigger
Set next TPC output data
Set next TPC output data
Select interrupt request
Set initial output data
Select GR functions
Normal TPC output
Enable TPC output
Select port output
Compare match?
Set GRA value
Start counter
Yes
No
1
2
3
4
5
6
7
8
9
10
11
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Set TIOR to make GRA an output compare
register (with output inhibited).
Set the TPC output trigger period.
Select the counter clock source with bits
TPSC2 to TPSC0 in TCR. Select the
counter clear source with bits CCLR1 and
CCLR0.
Enable the IMFA interrupt in TISRA.
Set the initial output values in the DR bits
of the input/output port pins to be used for
TPC output.
Set the DDR bits of the input/output port
pins to be used for TPC output to 1.
Set the NDER bits of the pins to be used
for TPC output to 1.
Select the 16-bit timer compare match
event to be used as the TPC output trigger
in TPCR.
Set the next TPC output values in the NDR
bits.
Set the STR bit to 1 in TSTR to start the
timer counter.
At each IMFA interrupt, set the next output
values in the NDR bits.