DS26519GA2 Maxim Integrated, DS26519GA2 Datasheet - Page 184
![no-image](/images/no-image-200.jpg)
DS26519GA2
Manufacturer Part Number
DS26519GA2
Description
Network Controller & Processor ICs
Manufacturer
Maxim Integrated
Datasheet
1.DS26519GA2.pdf
(310 pages)
Specifications of DS26519GA2
Part # Aliases
90-26519-0A2
- Current page: 184 of 310
- Download datasheet (3Mb)
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
Bit 7: One-Second Select (1SECS). This bit allows for synchronization of the error counter updates between
multiple ports. When ERCNT.3 = 0, setting this bit (on a specific framer) will update the framer’s error counters on
the transition of the one-second timer from framer 1. Note that this bit should always be clear for framer 1.
Bit 6 : Manual Counter Update Select (MCUS). When manual update mode is enabled with EAMS, this bit can be
used to allow the incoming LATCH_CNT signal to latch all counters. Useful for synchronously latching counters of
multiple DS26519 cores located on the same die.
Bit 5: Manual Error Counter Update (MECU). When enabled by ERCNT.3, the changing of this bit from a 0 to a 1
allows the next clock cycle to load the error counter registers with the latest counts and reset the counters. The
user must wait a minimum of 250 μ s before reading the error count registers to allow for proper update.
Bit 4: Error Counter Update Select (ECUS)
Bit 3: Error Accumulation Mode Select (EAMS)
Bit 2: PCVCR Fs-Bit Error Report Enable (FSBE) (T1 Mode Only)
Bit 1: Multiframe Out of Sync Count Register Function Select (MOSCRF) (T1 Mode Only)
Bit 0: T1 Line Code Violation Count Register Function Select (LCVCRF)
0 = Use the one-second timer that is internal to the framer.
1 = Use the one-second timer from framer 1 to latch updates.
0 = MECU is used to manually latch counters.
1 = Counters are latched on the rising edge of the LATCH_CNT signal.
T1 mode:
0 = Update error counters once a second.
1 = Update error counters every 42ms (333 frames).
E1 mode:
0 = Update error counters once a second.
1 = Update error counters every 62.5ms (500 frames).
0 = Automatic updating of error counters enabled. The state of ERCNT.4 determines accumulation time
(timed update).
1 = User toggling of ERCNT.5 determines accumulation time (manual update).
0 = Do not report bit errors in Fs-bit position; only Ft-bit position.
1 = Report bit errors in Fs-bit position as well as Ft-bit position.
0 = Count errors in the framing bit position.
1 = Count the number of multiframes out of sync.
0 = Do not count excessive zeros.
1 = Count excessive zeros.
1SECS
1SECS
7
0
ERCNT
Error Counter Configuration Register
086h + (200h x (n - 1)) + (2000h x [(n - 1) / 8]): where n = 1 to 16
MCUS
MCUS
6
0
MECU
MECU
5
0
184 of 310
ECUS
ECUS
4
0
EAMS
EAMS
3
0
DS26519 16-Port T1/E1/J1 Transceiver
FSBE
—
2
0
MOSCRF
—
1
0
LCVCRF
LCVCRF
0
0
Related parts for DS26519GA2
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![ds26519](/images/no-image3.png)
Part Number:
Description:
Ds26519 16-port T1/e1/j1 Transceiver
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![DS26](/images/no-image3.png)
Part Number:
Description:
power light source LUXEON® Collimator
Manufacturer:
LUMILEDS [Lumileds Lighting Company]
Datasheet:
![MAX3261CCJ](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
Single +5V, fully integrated, 1.25Gbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
![MAX3263CAG](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
Single +5V, fully integrated, 155Mbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
![MAX7528KCWP](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
MAX7528KCWPMaxim Integrated Products [CMOS Dual 8-Bit Buffered Multiplying DACs]
Manufacturer:
Maxim Integrated Products
Datasheet:
![MAX8809AETL+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
VRD11/VRD10, K8 Rev F 2/3/4-Phase PWM Controllers with Integrated Dual MOSFET Drivers
Manufacturer:
Maxim Integrated Products
Datasheet:
![MAX1535CETJ+T](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
Highly Integrated Level 2 SMBus Battery Chargers
Manufacturer:
Maxim Integrated Products
Datasheet:
![DS2741N+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
Current Monitor and Accumulator with Integrated Sense Resistor; ; Temperature Range: -40°C to +85°C
Manufacturer:
Maxim Integrated Products
![MAX13450EAUD+T](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
![MAX13451EAUD+T](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
![MAX17497BATE+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
QFN 16/A°/AC-DC and DC-DC Peak-Current-Mode Converters with Integrated Step
Manufacturer:
Maxim Integrated Products
![MAX17502FATB+T](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
TDFN/A/65V, 1A, 600KHZ, SYNCHRONOUS STEP-DOWN REGULATOR WITH INTEGRATED SWI
Manufacturer:
Maxim Integrated Products
![MAX1978EVKIT](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
Integrated Temperature Controller f
Manufacturer:
Maxim Integrated Products
![MAX2606EUT+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
SOT23-6/I°/45MHz to 650MHz, Integrated IF VCOs with Differential Output
Manufacturer:
Maxim Integrated Products