DS26519GA2 Maxim Integrated, DS26519GA2 Datasheet - Page 79

• Manufacturer Part Number: DS26519GA2
• Description: Network Controller & Processor ICs
• Manufacturer: Maxim Integrated

Specifications of DS26519GA2

• Part # Aliases: 90-26519-0A2

9.9.10 DS0 Monitoring Function
The DS26519 can monitor one DS0 (64kbps) channel in the transmit direction and one DS0 channel in the receive
direction at the same time.
Table 9-32. Registers Related to DS0 Monitoring
Transmit DS0 Channel Monitor Select
Register (TDS0SEL)
Transmit DS0 Monitor Register
(TDS0M)
Receive Channel Monitor Select Register
(RDS0SEL)
Receive DS0 Monitor Register
(RDS0M)
Note: The addresses shown above are for Framer 1.
In the transmit direction the user will determine which channel is to be monitored by properly setting the TCM[4:0]
bits in the
properly set. The DS0 channel pointed to by the TCM[4:0] bits will appear in the Transmit DS0 Monitor Register
(TDS0M) and the DS0 channel pointed to by the RCM[4:0] bits will appear in the Receive DS0 Monitor Register
(RDS0M). The TCM[4:0] and RCM[4:0] bits should be programmed with the decimal decode of the appropriate
T1or E1 channel. T1 channels 1 to 24 map to register values 0 to 23. E1 channels 1 to 32 map to register values 0
to 31. For example, if DS0 channel 6 in the transmit direction and DS0 channel 15 in the receive direction needed
to be monitored, then the following values would be programmed into TDS0SEL and RDS0SEL:
TDS0SEL
REGISTER
register. In the receive direction, the RCM[4:0] bits in the
Table 9-32
shows the registers related to the control of transmit and receive DS0.
TCM4 = 0
TCM3 = 0
TCM2 = 1
TCM1 = 0
TCM0 = 1
ADDRESSES
FRAMER 1
79 of 310
1BBh
189h
012h
060h
RCM4 = 0
RCM3 = 1
RCM2 = 1
RCM1 = 1
RCM0 = 0
Transmit channel to be monitored.
Monitored data.
Receive channel to be monitored.
Monitored data.
DS26519 16-Port T1/E1/J1 Transceiver
RDS0SEL
FUNCTION
register need to be