EM357-MOD-LR-ANT-TG Ember, EM357-MOD-LR-ANT-TG Datasheet - Page 142

MODULE EM357 PA/LNA W/ANT TG

EM357-MOD-LR-ANT-TG

Manufacturer Part Number
EM357-MOD-LR-ANT-TG
Description
MODULE EM357 PA/LNA W/ANT TG
Manufacturer
Ember
Datasheets

Specifications of EM357-MOD-LR-ANT-TG

Frequency
2.4GHz
Data Rate - Maximum
250kbps
Modulation Or Protocol
802.15.4 Zigbee
Voltage - Supply
2.1 V ~ 3.6 V
Current - Receiving
25mA
Current - Transmitting
42mA
Data Interface
PCB, Surface Mount
Memory Size
192kB Flash, 12kB RAM
Antenna Connector
On-Board, Chip
Operating Temperature
-40°C ~ 85°C
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Power - Output
-
Applications
-
Sensitivity
-
Other names
636-1020
9.3.9.3
Center-aligned mode is active except when the TIM_CMS bits in the TIMx_CR1 register are 00 (all
configurations where TIM_CMS is non-zero have the same effect on the OCyREF/OCy signals). The compare flag
is set when the counter counts up, when it counts down, or when it counts up and down, depending on the
TIM_CMS bits configuration. The direction bit (TIM_DIR) in the TIMx_CR1 register is updated by hardware and
must not be changed by software. Refer to the Center-Aligned Mode (Up/Down Counting) section for more
information.
Figure 9-23 shows some center-aligned PWM waveforms in an example where:
TIMx_ARR = 8
PWM mode is the PWM mode 1
The output compare flag is set when the counter counts down corresponding to the center-aligned mode 1
selected for TIM_CMS = 01 in the TIMx_CR1 register
PWM Center-Aligned Mode
Figure 9-23. Center-Aligned PWM Waveforms (ARR = 8)
Final
9-18
120-035X-000G

Related parts for EM357-MOD-LR-ANT-TG