PIC18F26K80-E/SP Microchip Technology Inc., PIC18F26K80-E/SP Datasheet - Page 103

• Manufacturer Part Number: PIC18F26K80-E/SP
• Description: 28 SPDIP .300IN TUBE, ECAN, 64KB FLASH, 4KB RAM, 16 MIPS, 12-BIT ADC, CTMU
• Manufacturer: Microchip Technology Inc.

Specifications of PIC18F26K80-E/SP

• A/d Inputs: 8-Channel, 12-Bit
• Comparators: 2
• Cpu Speed: 16 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 24
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 28-pin SPDIP
• Programmable Memory: 64K Bytes
• Ram Size: 3.6K Bytes
• Speed: 64 MHz
• Temperature Range: –40 to 125 °C
• Timers: 2-8-bit, 3-16-bit
• Voltage, Range: 1.8-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part

TABLE 5-4:
 2011 Microchip Technology Inc.
BRGCON2
BRGCON1
TXERRCNT
RXERRCNT
Legend:
Note 1:
Register
2:
3:
4:
5:
6:
u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the hardware
stack.
See
Bits 6 and 7 of PORTA, LATA and TRISA are enabled, depending on the oscillator mode selected. When not
enabled as PORTA pins, they are disabled and read ‘0’.
This register reads all ‘0’s until the ECAN™ technology is set up in Mode 1 or Mode 2.
Table 5-3
INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
PIC18F2XK80
PIC18F2XK80
PIC18F2XK80
PIC18F2XK80
for Reset value for specific condition.
Applicable Devices
PIC18F4XK80
PIC18F4XK80
PIC18F4XK80
PIC18F4XK80
PIC18F6XK80
PIC18F6XK80
PIC18F6XK80
PIC18F6XK80
Preliminary
PIC18F66K80 FAMILY
0000 0000
0000 0000
0000 0000
0000 0000
Brown-out
Power-on
Reset,
Reset
RESET Instruction,
MCLR Resets,
Stack Resets
WDT Reset,
0000 0000
0000 0000
0000 0000
0000 0000
DS39977C-page 103
Wake-up via
uuuu uuuu
uuuu uuuu
uuuu uuuu
uuuu uuuu
or Interrupt
WDT