PIC18F26K80-E/SP Microchip Technology Inc., PIC18F26K80-E/SP Datasheet - Page 224

• Manufacturer Part Number: PIC18F26K80-E/SP
• Description: 28 SPDIP .300IN TUBE, ECAN, 64KB FLASH, 4KB RAM, 16 MIPS, 12-BIT ADC, CTMU
• Manufacturer: Microchip Technology Inc.

Specifications of PIC18F26K80-E/SP

• A/d Inputs: 8-Channel, 12-Bit
• Comparators: 2
• Cpu Speed: 16 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 24
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 28-pin SPDIP
• Programmable Memory: 64K Bytes
• Ram Size: 3.6K Bytes
• Speed: 64 MHz
• Temperature Range: –40 to 125 °C
• Timers: 2-8-bit, 3-16-bit
• Voltage, Range: 1.8-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part

PIC18F66K80 FAMILY
14.8.3
When Timer1 Gate Toggle mode is enabled, it is
possible to measure the full cycle length of a Timer1
gate signal, as opposed to the duration of a single level
pulse.
The Timer1 gate source is routed through a flip-flop that
changes state on every incrementing edge of the
signal. (For timing details, see
FIGURE 14-5:
DS39977C-page 224
TMR1GE
T1GPOL
T1GVAL
T1G_IN
T1GTM
Timer1
T1CKI
TIMER1 GATE TOGGLE MODE
N
TIMER1 GATE TOGGLE MODE
Figure
14-5.)
N + 1 N + 2 N + 3
Preliminary
The T1GVAL bit (T1GCON<2>) indicates when the
Toggled mode is active and the timer is counting.
The Timer1 Gate Toggle mode is enabled by setting the
T1GTM bit (T1GCON<5>). When T1GTM is cleared,
the flip-flop is cleared and held clear. This is necessary
in order to control which edge is measured.
N + 4
N + 5 N + 6 N + 7
 2011 Microchip Technology Inc.
N + 8