sed1355 ETC-unknow, sed1355 Datasheet - Page 309

• Manufacturer Part Number: sed1355
• Description: Sed1355 Embedded Ramdac Lcd/crt Controller
• Manufacturer: ETC-unknow

Epson Research and Development
Vancouver Design Center
SED1355 Supported Evaluation Platforms
Installation
Usage
1355BMP Demonstration Program
Issue Date: 98/10/30
1355BMP
Note
1355BMP is a demonstration utility used to show the SED1355 display capabilities by rendering
bitmap images on the display. The program will display any bitmap in Windows BMP file format
and then exit. 1355BMP also loads images to demonstrate the hardware cursor and ink layer.
1355BMP is designed to operate on a personal computer (PC) in the DOS environment only. Other
embedded platforms are not supported due to the possible lack of system memory or structured file
system.
The 1355BMP demonstration utility must be configured and/or compiled to work with your
hardware configuration. The program 1355CFG.EXE can be used to configure 1355BMP. Consult
the 1355CFG users guide, document number X23A-B-001-xx, for more information on configuring
SED1355 utilities.
1355BMP supports the following SED1355 evaluation platforms:
• PC system with an Intel 80x86 processor.
Copy the file 1355BMP.EXE to a directory that is in the DOS path on your hard drive.
At the prompt, type 1355bmp bmpfile [t=reg | cursor | ink] [x=n y=n]
[/buffer] [/crt] [/lcd] [/mouse] [/noclear] [/noinit] [/p] [/v]
[/?].
Where:
The 1355BMP source code may be modified by the OEM to support other evaluation platforms.
bmpfile
t=??
x=n
y=n
/buffer
/crt
/lcd
filename of a windows format bmp image
reg:
cursor: hardware cursor image
ink:
n = starting cursor x position (default position = 0)
n = starting cursor y position (default position = 0)
enable double buffering (image not displayed until completely loaded
in memory)
displays the image on a CRT
displays the image on an LCD panel
regular display image
ink layer image
X23A-B-006-03
SED1355
Page 1