M30624FGAFP#U3 Renesas Electronics America, M30624FGAFP#U3 Datasheet - Page 256

• Manufacturer Part Number: M30624FGAFP#U3
• Description: IC M16C MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30624FGAFP#U3

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SIO, UART/USART
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 20K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• For Use With: 867-1000 - KIT QUICK START RENESAS 62PM3062PT3-CPE-3 - EMULATOR COMPACT M16C/62P/30P
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Appendix Standard Serial I/O Mode 1 (Flash Memory Version)
Figure 1.29.20. Full status check flowchart and remedial procedure for errors
Full Status Check
Results from executed erase and program operations can be known by running a full status check. Figure
1.29.20 shows a flowchart of the full status check and explains how to remedy errors which occur.
End (block erase, program)
Note: When one of SR5 to SR3 is set to 1, none of the page program, block erase,
Read status register
SR4=1 and SR5
erase all unlock blocks and lock bit program commands is accepted. Execute the
clear status register command (50
SR5=0?
SR4=0?
SR3=0?
=1 ?
YES
YES
YES
NO
YES
NO
NO
NO
Program error (page
Block erase error
sequence error
Program error
Command
or lock bit)
(block)
16
) before executing these commands.
After erasing the block in error, execute write
operation one more time. If the same error still
occurs, the block in error cannot be used.
Execute the clear status register command (50
to clear the status register. Try performing the
operation one more time after confirming that the
command is entered correctly.
Execute the read lock bit status command (71
to see if the block is locked. After removing lock,
execute write operation in the same way. If the
error still occurs, the page in error cannot be
used.
Should a block erase error occur, the block in error
cannot be used.
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M16C / 62A Group
Mitsubishi microcomputers
16
16
)
)
253