M30624FGAFP#U3 Renesas Electronics America, M30624FGAFP#U3 Datasheet - Page 269

• Manufacturer Part Number: M30624FGAFP#U3
• Description: IC M16C MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30624FGAFP#U3

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SIO, UART/USART
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 20K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• For Use With: 867-1000 - KIT QUICK START RENESAS 62PM3062PT3-CPE-3 - EMULATOR COMPACT M16C/62P/30P
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Appendix Standard Serial I/O Mode 2 (Flash Memory Version)
266
Figure 1.29.38. Timing for the read check data
Figure 1.29.39. Timing of baud rate 9600
Read Check Data
Baud Rate 9600
This command reads the check data that confirms that the write data, which was sent with the page
program command, was successfully received.
To use this read check data command, first execute the command and then initialize the check data.
Next, execute the page program command the required number of times. After that, when the read
check command is executed again, the check data for all of the read data that was sent with the page
program command during this time is read. The check data is the result of CRC operation of write
data.
This command changes baud rate to 9,600 bps. Execute it as follows.
(1) Transfer the "FD
(2) The check data (low) is received with the 2nd byte and the check data (high) with the 3rd.
(1) Transfer the "B0
(2) After the "B0
(M16C reception data)
(M16C transmit data)
(M16C reception data)
(M16C transmit data)
16
RxD1
" check code is output with the 2nd byte, change the baud rate to 9,600 bps.
TxD1
16
16
" command code with the 1st byte.
" command code with the 1st byte.
RxD1
TxD1
B0
16
Check data (low)
B0
FD
16
16
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Check data (high)
M16C / 62A Group
Mitsubishi microcomputers