PEB2256E INFINEON [Infineon Technologies AG], PEB2256E Datasheet - Page 117

• Manufacturer Part Number: PEB2256E
• Description: E1/T1/J1 Framer and Line Interface Component for Long and Short Haul Applications
• Manufacturer: INFINEON [Infineon Technologies AG]

4.6.5
Each of the 32 time slots can be selected for loop-back from the system PCM input (XDI)
to the system PCM output (RDO). This loop-back is programmed for one time slot at a
time selected by register LOOP. During loop-back, an idle channel code programmed in
register IDLE is transmitted to the remote end in the corresponding PCM route time slot.
For the time slot test, sending sequences of test patterns like a 1-kHz check signal shall
be avoided. Otherwise an increased occurrence of slips in the tested time slot disturbs
testing. These slips do not influence the other time slots and the function of the receive
memory. The usage of a quasi-static test pattern is recommended.
Figure 40
Data Sheet
RL1
RL2
XL1
XL2
Single Channel Loop-Back
Single Channel Loop-Back (E1)
Clock +
Data
Recovery
Trans.
Framer
RCLK
Rec.
Framer
MUX
117
IDLE Code
MUX
Functional Description E1
Elast.
Store
Elast.
Store
FALC56 V1.2
ITS09747
PEB 2256
RDO
XDI
2002-08-27