HD64F2636UF20 Renesas Electronics America, HD64F2636UF20 Datasheet - Page 488

• Manufacturer Part Number: HD64F2636UF20
• Description: IC H8S MCU FLASH 128K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2636UF20

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SmartCard
• Peripherals: Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 12 Watchdog Timer
Writing to RSTCSR: RSTCSR must be written to by word transfer instruction to address
H'FF76. It cannot be written to with byte instructions.
Figure 12-3 shows the format of data written to RSTCSR. The method of writing 0 to the WOVF
bit differs from that for writing to the RSTE bit.
To write 0 to the WOVF bit, the write data must have H'A5 in the upper byte and H'00 in the
lower byte. This clears the WOVF bit to 0, but has no effect on the RSTE bit. To write to the
RSTE bit, the upper byte must contain H'5A and the lower byte must contain the write data. This
writes the values in bits 6 and 5 of the lower byte into the RSTE bit, but has no effect on the
WOVF bit.
Reading TCNT, TCSR, and RSTCSR (WDT0): These registers are read in the same way as
other registers. The read addresses are H'FF74 for TCSR, H'FF75 for TCNT, and H'FF77 for
RSTCSR.
Page 438 of 1458
Writing 0 to WOVF bit
Writing to RSTE bit
Address: H'FF76
Address: H'FF76
Figure 12-3 Format of Data Written to RSTCSR (WDT0)
15
15
H'A5
H'5A
8 7
8 7
H8S/2639, H8S/2638, H8S/2636,
Write data
REJ09B0103-0800 Rev. 8.00
H8S/2630, H8S/2635 Group
H'00
May 28, 2010
0
0