HD64F2636UF20 Renesas Electronics America, HD64F2636UF20 Datasheet - Page 579

• Manufacturer Part Number: HD64F2636UF20
• Description: IC H8S MCU FLASH 128K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2636UF20

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SmartCard
• Peripherals: Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
Smart Card Mode Register (SCMR) Setting: The SDIR bit is cleared to 0 if the IC card is of the
direct convention type, and set to 1 if of the inverse convention type.
The SINV bit is cleared to 0 if the IC card is of the direct convention type, and set to 1 if of the
inverse convention type.
The SMIF bit is set to 1 in the case of the Smart Card interface.
Examples of register settings and the waveform of the start character are shown below for the two
types of IC card (direct convention and inverse convention).
• Direct convention (SDIR = SINV = O/E = 0)
• Inverse convention (SDIR = SINV = O/E = 1)
REJ09B0103-0800 Rev. 8.00
May 28, 2010
With the direct convention type, the logic 1 level corresponds to state Z and the logic 0 level to
state A, and transfer is performed in LSB-first order. The start character data above is H'3B.
The parity bit is 1 since even parity is stipulated for the Smart Card.
With the inverse convention type, the logic 1 level corresponds to state A and the logic 0 level
to state Z, and transfer is performed in MSB-first order. The start character data above is H'3F.
The parity bit is 0, corresponding to state Z, since even parity is stipulated for the Smart Card.
With the H8S/2636, H8S/2638, H8S/2639, and H8S/2630 inversion specified by the SINV bit
applies only to the data bits, D7 to D0. For parity bit inversion, the O/E bit in SMR is set to
odd parity mode (the same applies to both transmission and reception).
(Z)
(Z)
Ds
Ds
A
A
D0
D7
Z
Z
D1
D6
Z
Z
D2
D5
A
A
D3
D4
Z
A
D4
D3
A
Z
D5
D2
Z
A
D6
D1
A
A
D7
D0
A
A
Dp
Section 14 Smart Card Interface
Dp
Z
Z
(Z)
(Z)
State
State
Page 529 of 1458