HD64F2636UF20 Renesas Electronics America, HD64F2636UF20 Datasheet - Page 908

• Manufacturer Part Number: HD64F2636UF20
• Description: IC H8S MCU FLASH 128K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2636UF20

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SmartCard
• Peripherals: Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

H8S/2639, H8S/2638, H8S/2636,
Section 21C ROM
H8S/2630, H8S/2635 Group
(H8S/2635 Group)
21C.4.5 Flash Memory Emulation in RAM
Emulation should be performed in user mode or user program mode. When the emulation block
set in RAMER is accessed while the emulation function is being executed, data written in the
overlap RAM is read.
SCI
Flash memory
RAM
Emulation block
Overlap RAM
(emulation is performed
on data written in RAM)
Application program
Execution state
Figure 21C-4 Reading Overlap RAM Data in User Mode or User Program Mode
When overlap RAM data is confirmed, the RAMS bit is cleared, RAM overlap is released, and
writes should actually be performed to the flash memory.
When the programming control program is transferred to RAM, ensure that the transfer destination
and the overlap RAM do not overlap, as this will cause data in the overlap RAM to be rewritten.
Page 858 of 1458
REJ09B0103-0800 Rev. 8.00
May 28, 2010