HD64F2636UF20 Renesas Electronics America, HD64F2636UF20 Datasheet - Page 602

• Manufacturer Part Number: HD64F2636UF20
• Description: IC H8S MCU FLASH 128K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2636UF20

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SmartCard
• Peripherals: Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 15 I
(Only for the H8S/2638, H8S/2639, and H8S/2630)
TDRE
0
1
RDRF
0
1
Page 552 of 1458
2
C Bus Interface [Option]
Description
The next transmit data is in ICDR (ICDRT), or transmission cannot
be started
[Clearing conditions]
•
•
•
•
The next transmit data can be written in ICDR (ICDRT)
[Setting conditions]
•
•
•
The data in ICDR (ICDRR) is invalid
[Clearing condition]
•
The ICDR (ICDRR) receive data can be read
[Setting condition]
•
Description
When transmit data is written in ICDR (ICDRT) in transmit mode (TRS = 1)
When a stop condition is detected in the bus line state after a stop condition is
issued with the I
When a stop condition is detected with the I
In receive mode (TRS = 0)
(A 0 write to TRS during transfer is valid after reception of a frame containing an
acknowledge bit)
In transmit mode (TRS = 1), when a start condition is detected in the bus line state
after a start condition is issued in master mode with the I
format selected
When data is transferred from ICDRT to ICDRS
(Data transfer from ICDRT to ICDRS when TRS = 1 and TDRE = 0, and ICDRS is
empty)
In receive mode (TRS = 0), when a switch is made from slave receive mode (TRS
= 0) to transmit mode (TRS = 1) after detection of a start condition (first time only)
When ICDR (ICDRR) receive data is read in receive mode
When data is transferred from ICDRS to ICDRR
(Data transfer from ICDRS to ICDRR in case of normal termination with TRS = 0
and RDRF = 0)
2
C bus format or serial format selected
2
C bus format selected
2
H8S/2639, H8S/2638, H8S/2636,
C bus format or serial
REJ09B0103-0800 Rev. 8.00
H8S/2630, H8S/2635 Group
(Initial value)
(Initial value)
May 28, 2010