HD64F2636UF20 Renesas Electronics America, HD64F2636UF20 Datasheet - Page 491

• Manufacturer Part Number: HD64F2636UF20
• Description: IC H8S MCU FLASH 128K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2636UF20

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SmartCard
• Peripherals: Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
12.3.2
To use the WDT as an interval timer, clear the WT/IT bit in TCSR to 0 and set the TME bit to 1.
An interval timer interrupt (WOVI) is generated each time TCNT overflows, provided that the
WDT is operating as an interval timer, as shown in figure 12-5. This function can be used to
generate interrupt requests at regular intervals.
12.3.3
The OVF flag is set to 1 if TCNT overflows during interval timer operation. At the same time, an
interval timer interrupt (WOVI) is requested. This timing is shown in figure 12-6.
With WDT1, the OVF bit of the TCSR is set to 1 and a simultaneous NMI interrupt is requested
when the TCNT overflows if the NMI request has been chosen in the watchdog timer mode.
REJ09B0103-0800 Rev. 8.00
May 28, 2010
Legend:
WOVI: Interval timer interrupt request generation
H'FF
H'00
TCNT value
WT/IT = 0
TME = 1
Interval Timer Operation
Timing of Setting Overflow Flag (OVF)
Overflow
WOVI
Figure 12-5 Interval Timer Operation
Overflow
WOVI
Overflow
WOVI
Section 12 Watchdog Timer
Overflow
WOVI
Page 441 of 1458
Time