HD64F2636UF20 Renesas Electronics America, HD64F2636UF20 Datasheet - Page 647

• Manufacturer Part Number: HD64F2636UF20
• Description: IC H8S MCU FLASH 128K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2636UF20

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SmartCard
• Peripherals: Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
15.3.9
The logic levels at the SCL and SDA pins are routed through noise cancelers before being latched
internally. Figure 15-20 shows a block diagram of the noise canceler circuit.
The noise canceler consists of two cascaded latches and a match detector. The SCL (or SDA)
input signal is sampled on the system clock, but is not passed forward to the next circuit unless the
outputs of both latches agree. If they do not agree, the previous value is held.
15.3.10 Initialization of Internal State
The IIC has a function for forcible initialization of its internal state if a deadlock occurs during
communication.
Initialization is executed by (1) setting bits CLR3 to CLR0 in the DDCSWR register or (2)
clearing the ICE bit. For details of settings for bits CLR3 to CLR0, see section 15.2.8, DDC
Switch Register (DDCSWR).
Scope of Initialization: The initialization executed by this function covers the following items:
• TDRE and RDRF internal flags
• Transmit/receive sequencer and internal operating clock counter
• Internal latches for retaining the output state of the SCL and SDA pins (wait, clock, data
REJ09B0103-0800 Rev. 8.00
May 28, 2010
output, etc.)
SCL or
SDA input
signal
Sampling
clock
Noise Canceler
D
Sampling clock
System clock
period
Figure 15-20 Block Diagram of Noise Canceler
Latch
C
Q
D
Latch
C
Q
(Only for the H8S/2638, H8S/2639, and H8S/2630)
Section 15 I
detector
Match
2
C Bus Interface [Option]
Page 597 of 1458
Internal
SCL or
SDA
signal