LPC1769FBD100,551 NXP Semiconductors, LPC1769FBD100,551 Datasheet - Page 296
![IC ARM CORTEX MCU 512K 100-LQFP](/photos/6/65/66516/568-100-lqfp_sot407-1_sml.jpg)
LPC1769FBD100,551
Manufacturer Part Number
LPC1769FBD100,551
Description
IC ARM CORTEX MCU 512K 100-LQFP
Manufacturer
NXP Semiconductors
Series
LPC17xxr
Datasheets
1.OM11043.pdf
(79 pages)
2.LPC1767FBD100551.pdf
(2 pages)
3.LPC1767FBD100551.pdf
(840 pages)
4.LPC1769FBD100551.pdf
(66 pages)
Specifications of LPC1769FBD100,551
Program Memory Type
FLASH
Program Memory Size
512KB (512K x 8)
Package / Case
100-LQFP
Core Processor
ARM® Cortex-M3™
Core Size
32-Bit
Speed
120MHz
Connectivity
CAN, Ethernet, I²C, IrDA, Microwire, SPI, SSI, UART/USART, USB OTG
Peripherals
Brown-out Detect/Reset, DMA, I²S, Motor Control PWM, POR, PWM, WDT
Number Of I /o
70
Ram Size
64K x 8
Voltage - Supply (vcc/vdd)
2.4 V ~ 3.6 V
Data Converters
A/D 8x12b, D/A 1x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Processor Series
LPC17
Core
ARM Cortex M3
Data Bus Width
32 bit
Data Ram Size
64 KB
Interface Type
Ethernet, USB, OTG, CAN
Maximum Clock Frequency
120 MHz
Number Of Programmable I/os
70
Number Of Timers
4
Operating Supply Voltage
3.3 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
MDK-ARM, RL-ARM, ULINK2, MCB1760, MCB1760U, MCB1760UME
Minimum Operating Temperature
- 40 C
On-chip Adc
12 bit, 8 Channel
On-chip Dac
10 bit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
568-4966
935290522551
935290522551
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
LPC1769FBD100,551
Manufacturer:
NXP Semiconductors
Quantity:
10 000
- OM11043 PDF datasheet
- LPC1767FBD100551 PDF datasheet #2
- LPC1767FBD100551 PDF datasheet #3
- LPC1769FBD100551 PDF datasheet #4
- Current page: 296 of 840
- Download datasheet (6Mb)
NXP Semiconductors
13.11 USB OTG controller initialization
UM10360
User manual
13.10.1.1 Host clock request signals
13.10.2 Power-down mode support
The dev_dma_need_clk signal is asserted on any Device controller DMA access to
memory. Once asserted, it remains active for 2 ms (2 frames), to help assure that DMA
throughput is not affected by any latency associated with re-enabling ahb_master_clk.
2 ms after the last DMA access, dev_dma_need_clk is de-asserted to help conserve
power. This signal allows AHB_CLK_EN to be cleared during normal operation.
The Host controller has two clock request signals, host_need_clk and
host_dma_need_clk. When asserted, these signals turn on the host’s 48 MHz clock and
ahb_master_clk respectively.
The host_need_clk signal is asserted while the Host controller functional state is not
UsbSuspend, or if the functional state is UsbSuspend and resume signaling or a
disconnect is detected on the USB bus. This signal allows HOST_CLK_EN to be cleared
during normal operation when software does not need to access the Host controller
registers – the Host will continue to function normally and automatically shut off its clock
when it goes into the UsbSuspend state.
The host_dma_need_clk signal is asserted on any Host controller DMA access to
memory. Once asserted, it remains active for 2 ms (2 frames), to help assure that DMA
throughput is not affected by any latency associated with re-enabling ahb_master_clk.
2 ms after the last DMA access, host_dma_need_clk is de-asserted to help conserve
power. This signal allows AHB_CLK_EN to be cleared during normal operation.
The LPC17xx can be configured to wake up from Power-down mode on any USB bus
activity. When the chip is in Power-down mode and the USB interrupt is enabled, the
assertion of USB_NEED_CLK causes the chip to wake up from Power-down mode.
Before Power-down mode can be entered when the USB activity interrupt is enabled,
USB_NEED_CLK must be de-asserted. This is accomplished by clearing all of the
CLK_EN bits in OTGClkCtrl and putting the Host controller into the UsbSuspend
functional state. If it is necessary to wait for either of the dma_need_clk signals or the
dev_need_clk to be de-asserted, the status of USB_NEED_CLK can be polled in the
USBIntSt register to determine when they have all been de-asserted.
The LPC17xx OTG device controller initialization includes the following steps:
1. Enable the device controller by setting the PCUSB bit of PCONP.
2. Configure and enable the USB PLL (PLL1) or Main PLL (PLL0) to provide 48 MHz for
3. Enable the desired controller clocks by setting their respective CLK_EN bits in the
usbclk and the desired frequency for cclk. For correct operation of synchronization
logic in the device controller, the minimum cclk frequency is 18 MHz. For the
procedure for determining the PLL setting and configuration, see
“Procedure for determining PLL0 settings”
determining PLL1
USBClkCtrl register. Poll the corresponding CLK_ON bits in the USBClkSt register
until they are set.
All information provided in this document is subject to legal disclaimers.
settings”.
Rev. 2 — 19 August 2010
or
Section 4.6.9 “Procedure for
Chapter 13: LPC17xx USB OTG
Section 4.5.11
UM10360
© NXP B.V. 2010. All rights reserved.
296 of 840
Related parts for LPC1769FBD100,551
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![LPC1769](/images/manufacturer_photos/0/4/487/nxp_semiconductors_tmb.jpg)
Part Number:
Description:
32-bit Arm Cortex-m3 Microcontroller; Up To 512 Kb Flash And 64 Kb Sram With Ethernet, Usb 2.0 Host/device/otg, Can
Manufacturer:
NXP Semiconductors
Datasheet:
![LPC2420_60](/images/manufacturer_photos/0/4/487/nxp_semiconductors_tmb.jpg)
Part Number:
Description:
NXP Semiconductors designed the LPC2420/2460 microcontroller around a 16-bit/32-bitARM7TDMI-S CPU core with real-time debug interfaces that include both JTAG andembedded trace
Manufacturer:
NXP Semiconductors
Datasheet:
![LPC2458](/photos/41/52/415299/sot570-3_3d_tmb.gif)
Part Number:
Description:
NXP Semiconductors designed the LPC2458 microcontroller around a 16-bit/32-bitARM7TDMI-S CPU core with real-time debug interfaces that include both JTAG andembedded trace
Manufacturer:
NXP Semiconductors
Datasheet:
![LPC2468](/images/manufacturer_photos/0/4/487/nxp_semiconductors_tmb.jpg)
Part Number:
Description:
NXP Semiconductors designed the LPC2468 microcontroller around a 16-bit/32-bitARM7TDMI-S CPU core with real-time debug interfaces that include both JTAG andembedded trace
Manufacturer:
NXP Semiconductors
Datasheet:
![LPC2470](/images/manufacturer_photos/0/4/487/nxp_semiconductors_tmb.jpg)
Part Number:
Description:
NXP Semiconductors designed the LPC2470 microcontroller, powered by theARM7TDMI-S core, to be a highly integrated microcontroller for a wide range ofapplications that require advanced communications and high quality graphic displays
Manufacturer:
NXP Semiconductors
Datasheet:
![LPC2478](/images/manufacturer_photos/0/4/487/nxp_semiconductors_tmb.jpg)
Part Number:
Description:
NXP Semiconductors designed the LPC2478 microcontroller, powered by theARM7TDMI-S core, to be a highly integrated microcontroller for a wide range ofapplications that require advanced communications and high quality graphic displays
Manufacturer:
NXP Semiconductors
Datasheet:
![XA-G30](/images/manufacturer_photos/0/4/487/nxp_semiconductors_tmb.jpg)
Part Number:
Description:
The Philips Semiconductors XA (eXtended Architecture) family of 16-bit single-chip microcontrollers is powerful enough to easily handle the requirements of high performance embedded applications, yet inexpensive enough to compete in the market for hi
Manufacturer:
NXP Semiconductors
Datasheet:
![XA-G37](/photos/41/52/415289/sot187-2_3d_tmb.gif)
Part Number:
Description:
The Philips Semiconductors XA (eXtended Architecture) family of 16-bit single-chip microcontrollers is powerful enough to easily handle the requirements of high performance embedded applications, yet inexpensive enough to compete in the market for hi
Manufacturer:
NXP Semiconductors
Datasheet:
![XA-S3](/images/manufacturer_photos/0/4/487/nxp_semiconductors_tmb.jpg)
Part Number:
Description:
The XA-S3 device is a member of Philips Semiconductors? XA(eXtended Architecture) family of high performance 16-bitsingle-chip microcontrollers
Manufacturer:
NXP Semiconductors
Datasheet:
![LH75401_LH75411_N](/photos/41/52/415297/sot486-1_3d_tmb.gif)
Part Number:
Description:
The NXP BlueStreak LH75401/LH75411 family consists of two low-cost 16/32-bit System-on-Chip (SoC) devices
Manufacturer:
NXP Semiconductors
Datasheet:
![LPC3130_3131](/photos/41/52/415299/sot570-3_3d_tmb.gif)
Part Number:
Description:
The NXP LPC3130/3131 combine an 180 MHz ARM926EJ-S CPU core, high-speed USB2
Manufacturer:
NXP Semiconductors
Datasheet:
![LPC3141FET180](/photos/41/52/415299/sot570-3_3d_tmb.gif)
Part Number:
Description:
The NXP LPC3141 combine a 270 MHz ARM926EJ-S CPU core, High-speed USB 2
Manufacturer:
NXP Semiconductors
![LPC3143FET180](/photos/41/52/415299/sot570-3_3d_tmb.gif)
Part Number:
Description:
The NXP LPC3143 combine a 270 MHz ARM926EJ-S CPU core, High-speed USB 2
Manufacturer:
NXP Semiconductors
![LPC3152FET208](/photos/41/53/415307/sot930-1_3d_tmb.gif)
Part Number:
Description:
The NXP LPC3152 combines an 180 MHz ARM926EJ-S CPU core, High-speed USB 2
Manufacturer:
NXP Semiconductors
![LPC3154FET208](/photos/41/53/415307/sot930-1_3d_tmb.gif)
Part Number:
Description:
The NXP LPC3154 combines an 180 MHz ARM926EJ-S CPU core, High-speed USB 2
Manufacturer:
NXP Semiconductors