C8051F066-GQ Silicon Laboratories Inc, C8051F066-GQ Datasheet - Page 118

• Manufacturer Part Number: C8051F066-GQ
• Description: MCU 8-Bit C8051F06x 8051 CISC 32KB Flash 3.3V 100-Pin TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F06xr

Specifications of C8051F066-GQ

• Package: 100TQFP
• Device Core: 8051
• Family Name: C8051F06x
• Maximum Speed: 25 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 59
• Interface Type: I2C/SMBus/SPI/UART
• On-chip Adc: 2-chx16-bit
• Number Of Timers: 5
• Ram Size: 4.25 KB
• Program Memory Size: 32 KB
• Program Memory Type: Flash
• Operating Temperature: -40 to 85 °C
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 59
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 336-1221

C8051F060/1/2/3/4/5/6/7
Comparator inputs can be externally driven from -0.25 V to (VDD) + 0.25 V without damage or upset. The
complete electrical specifications for the Comparator are given in Table 12.1.
The Comparator response time may be configured in software using the CPnMD1-0 bits in register CPT-
nMD (see Figure 12.4). Selecting a longer response time reduces the amount of power consumed by the
comparator. See Table 12.1 for complete timing and current consumption specifications.
The hysteresis of the Comparator is software-programmable via its Comparator Control register (CPT-
nCN). The user can program both the amount of hysteresis voltage (referred to the input voltage) and the
positive and negative-going symmetry of this hysteresis around the threshold voltage.
The Comparator hysteresis is programmed using Bits3-0 in the Comparator Control Register CPTnCN
(shown in Figure 12.3). The amount of negative hysteresis voltage is determined by the settings of the
CPnHYN bits. As shown in Figure 12.2, the negative hysteresis can be programmed to three different set-
tings, or negative hysteresis can be disabled. In a similar way, the amount of positive hysteresis is deter-
mined by the setting the CPnHYP bits.
118
(Programmed with CPnHYP Bits)
Positive Hysteresis Voltage
INPUTS
OUTPUT
VIN+
VIN-
CIRCUIT CONFIGURATION
Positive Hysteresis
CPn-
CPn+
VIN+
VIN-
Disabled
V
OL
Figure 12.2. Comparator Hysteresis Plot
V
OH
+
_
CPn
Positive Hysteresis
Maximum
OUT
Rev. 1.2
Negative Hysteresis
Disabled
Negative Hysteresis
(Programmed by CPnHYN Bits)
Maximum
Negative Hysteresis Voltage