C8051F066-GQ Silicon Laboratories Inc, C8051F066-GQ Datasheet - Page 38

• Manufacturer Part Number: C8051F066-GQ
• Description: MCU 8-Bit C8051F06x 8051 CISC 32KB Flash 3.3V 100-Pin TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F06xr

Specifications of C8051F066-GQ

• Package: 100TQFP
• Device Core: 8051
• Family Name: C8051F06x
• Maximum Speed: 25 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 59
• Interface Type: I2C/SMBus/SPI/UART
• On-chip Adc: 2-chx16-bit
• Number Of Timers: 5
• Ram Size: 4.25 KB
• Program Memory Size: 32 KB
• Program Memory Type: Flash
• Operating Temperature: -40 to 85 °C
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 59
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 336-1221

C8051F060/1/2/3/4/5/6/7
3.
38
-40 to +85 °C, 25 MHz System Clock unless otherwise specified.
Analog Supply Voltage (AV+,
AVDD)
Digital Supply Voltage (VDD)
Analog-to-Digital Supply Delta
(|VDD - AV+| or |VDD - AVDD|)
Supply Current from Analog
Peripherals (active)
Supply Current from Analog
Peripherals (inactive)
Supply Current from CPU and
Digital Peripherals (CPU active)
(Note 3)
Supply Current from CPU and
Digital Peripherals (CPU inac-
tive, not accessing Flash)
(Note 3)
Supply Current with all systems
shut down
VDD Supply RAM Data Reten-
tion Voltage
SYSCLK (System Clock)
Specified Operating Tempera-
ture Range
Note 1: Analog Supply AV+ must be greater than 1 V for VDD monitor to operate.
Note 2: Internal Oscillator and VDD Monitor current not included. Individual supply current contributions
for each peripheral are listed in the chapter.
Note 3: Current increases linearly with supply Voltage.
Note 4: SYSCLK must be at least 32 kHz to enable debugging.
Global DC Electrical Characteristics
Parameter
Table 3.1. Global DC Electrical Characteristics
(Note 4)
(Note 1)
Internal REF, ADC, DAC, Com-
parators all enabled. (Note 2)
Internal REF, ADC, DAC, Com-
parators all disabled, oscillator
disabled.
VDD=2.7 V, Clock=25 MHz
VDD=2.7 V, Clock=1 MHz
VDD=2.7 V, Clock=32 kHz
VDD=3.0 V, Clock=25 MHz
VDD=3.0 V, Clock=1 MHz
VDD=3.0 V, Clock=32 kHz
VDD=2.7 V, Clock=25 MHz
VDD=2.7 V, Clock=1 MHz
VDD=2.7 V, Clock=32 kHz
VDD=3.0 V, Clock=25 MHz
VDD=3.0 V, Clock=1 MHz
VDD=3.0 V, Clock=32 kHz
Oscillator not running
Conditions
Rev. 1.2
Min
2.7
2.7
-40
0
Typ
3.0
3.0
0.2
0.7
1.0
0.5
0.8
0.2
1.5
14
18
30
20
35
13
20
16
23
Max
+85
3.6
3.6
0.5
25
Units
MHz
mA
mA
mA
mA
mA
mA
mA
mA
mA
µA
µA
µA
µA
µA
µA
°C
V
V
V
V