C8051F066-GQ Silicon Laboratories Inc, C8051F066-GQ Datasheet - Page 325

• Manufacturer Part Number: C8051F066-GQ
• Description: MCU 8-Bit C8051F06x 8051 CISC 32KB Flash 3.3V 100-Pin TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F06xr

Specifications of C8051F066-GQ

• Package: 100TQFP
• Device Core: 8051
• Family Name: C8051F06x
• Maximum Speed: 25 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 59
• Interface Type: I2C/SMBus/SPI/UART
• On-chip Adc: 2-chx16-bit
• Number Of Timers: 5
• Ram Size: 4.25 KB
• Program Memory Size: 32 KB
• Program Memory Type: Flash
• Operating Temperature: -40 to 85 °C
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 59
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 336-1221

C8051F060/1/2/3/4/5/6/7
26.3. Debug Support
Each MCU has on-chip JTAG and debug logic that provides non-intrusive, full speed, in-circuit debug sup-
port using the production part installed in the end application, via the four pin JTAG I/F. Silicon Labs' debug
system supports inspection and modification of memory and registers, breakpoints, and single stepping.
No additional target RAM, program memory, or communications channels are required. All the digital and
analog peripherals are functional and work correctly (remain synchronized) while debugging. The Watch-
dog Timer (WDT) is disabled when the MCU is halted during single stepping or at a breakpoint.
The C8051F060DK is a development kit with all the hardware and software necessary to develop applica-
tion code and perform in-circuit debug with each MCU in the C8051F06x family. Each kit includes develop-
ment software for the PC, a Serial Adapter (for connection to JTAG) and a target application board with a
C8051F060 installed. Serial cables and wall-mount power supply are also included.
Rev. 1.2
325