FDC37B727-NS Standard Microsystems (SMSC), FDC37B727-NS Datasheet - Page 92

• Manufacturer Part Number: FDC37B727-NS
• Manufacturer: Standard Microsystems (SMSC)

Specifications of FDC37B727-NS

• Pin Count: 128
• Lead Free Status / RoHS Status: Compliant

Write Sequence of Operation
1.
2.
3.
4.
5.
6.
7.
EPP 1.7 Read
The timing for a read operation (data) is shown in
timing diagram EPP 1.7 Read Data cycle.
The host sets PDIR bit in the control register
to a logic "0". This asserts nWRITE.
The host selects an EPP register, places data
on the SData bus and drives nIOW active.
The chip places address or data on PData
bus.
Chip asserts nDATASTB or nADDRSTRB
indicating that PData bus contains valid
information, and the WRITE signal is valid.
If
deasserted until the peripheral deasserts
nWAIT or a time-out occurs.
When the host deasserts nIOW the chip
deasserts nDATASTB or nADDRSTRB and
latches the data from the SData bus for the
PData bus.
Chip may modify nWRITE, PDIR and
nPDATA in preparation of the next cycle.
nWAIT
is
asserted,
IOCHRDY
is
92
IOCHRDY is driven active low when nWAIT is
active low during the EPP cycle. This can be used
to extend the cycle time.
complete when nWAIT is inactive high.
Read Sequence of Operation
1.
2.
3.
4.
5.
6.
7.
8.
9.
The host sets PDIR bit in the control register
to a logic "1". This deasserts nWRITE and tri-
states the PData bus.
The host selects an EPP register and drives
nIOR active.
Chip asserts nDATASTB or nADDRSTRB
indicating that PData bus is tri-stated, PDIR is
set and the nWRITE signal is valid.
If
deasserted until the peripheral deasserts
nWAIT or a time-out occurs.
The Peripheral drives PData bus valid.
The Peripheral deasserts nWAIT, indicating
that PData is valid and the chip may begin the
termination phase of the cycle.
When the host deasserts nIOR the chip
deasserts nDATASTB or nADDRSTRB.
Peripheral tri-states the PData bus.
Chip may modify nWRITE, PDIR and
nPDATA in preparation of the next cycle.
nWAIT
is
asserted,
The read cycle can
IOCHRDY
is