HD6412320 RENESAS [Renesas Technology Corp], HD6412320 Datasheet - Page 330

• Manufacturer Part Number: HD6412320
• Description: Renesas 16-Bit Single-Chip Microcomputer H8S Family H8S-2300 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

Section 7 DMA Controller (Not Supported in the H8S/2321)
7.5.14
There can be no break between a DMA cycle read and a DMA cycle write. This means that a
refresh cycle, external bus release cycle, or DTC cycle is not generated between the external read
and external write in a DMA cycle.
In the case of successive read and write cycles, such as in burst transfer or block transfer, a refresh
or external bus released state may be inserted after a write cycle. Since the DTC has a lower
priority than the DMAC, the DTC does not operate until the DMAC releases the bus.
When DMA cycle reads or writes are accesses to on-chip memory or internal I/O registers, these
DMA cycles can be executed at the same time as refresh cycles or external bus release. However,
simultaneous operation may not be possible when a write buffer is used.
Rev.6.00 Sep. 27, 2007 Page 300 of 1268
REJ09B0220-0600
Relation Between the DMAC and External Bus Requests, Refresh Cycles, and the
DTC