MCHC908GR8CFAE Freescale Semiconductor, MCHC908GR8CFAE Datasheet - Page 402

• Manufacturer Part Number: MCHC908GR8CFAE
• Description: IC MCU FLSH 8BIT8MHZ 7.5K32-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MCHC908GR8CFAE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 21
• Program Memory Size: 7.5KB (7.5K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Controller Family/series: HC08
• No. Of I/o's: 21
• Ram Memory Size: 384Byte
• Cpu Speed: 8MHz
• No. Of Timers: 2
• Embedded Interface Type: I2C, SCI, SPI
• Rohs Compliant: Yes
• Processor Series: HC08G
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8.2 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, DEMO908GZ60E, M68CBL05CE, M68EML08GPGTE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Glossary
prescaler — A circuit that generates an output signal related to the input signal by a fractional
program — A set of computer instructions that cause a computer to perform a desired operation
program counter (PC) — A 16-bit register in the CPU08. The PC register holds the address of
pull — An instruction that copies into the accumulator the contents of a stack RAM location. The
pullup — A transistor in the output of a logic gate that connects the output to the logic 1 voltage
pulse-width — The amount of time a signal is on as opposed to being in its off state.
pulse-width modulation (PWM) — Controlled variation (modulation) of the pulse width of a
push — An instruction that copies the contents of the accumulator to the stack RAM. The stack
PWM period — The time required for one complete cycle of a PWM waveform.
RAM — Random access memory. All RAM locations can be read or written by the CPU. The
RC circuit — A circuit consisting of capacitors and resistors having a defined time constant.
read — To copy the contents of a memory location to the accumulator.
register — A circuit that stores a group of bits.
reserved memory location — A memory location that is used only in special factory test modes.
reset — To force a device to a known condition.
ROM — Read-only memory. A type of memory that can be read but cannot be changed (written).
SCI — See "serial communication interface module (SCI)."
serial — Pertaining to sequential transmission over a single line.
Technical Data
402
scale factor such as 1/2, 1/8, 1/10 etc.
or operations.
the next instruction or operand that the CPU will use.
stack RAM address is in the stack pointer.
of the power supply.
signal with a constant frequency.
RAM address is in the stack pointer.
contents of a RAM memory location remain valid until the CPU writes a different value or
until power is turned off.
Writing to a reserved location has no effect. Reading a reserved location returns an
unpredictable value.
The contents of ROM must be specified before manufacturing the MCU.
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
Glossary
MC68HC908GR8 — Rev 4.0
MOTOROLA