AT91SAM7X128-CU Atmel, AT91SAM7X128-CU Datasheet - Page 281

• Manufacturer Part Number: AT91SAM7X128-CU
• Description: MCU ARM 128K HS FLASH 100-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7X128-CU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: CAN, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFBGA
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7X-EK - KIT EVAL FOR AT91SAM7X256/128
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

29. Two-wire Interface (TWI)
29.1
29.2
6120H–ATARM–17-Feb-09
Overview
Block Diagram
The Two-wire Interface (TWI) interconnects components on a unique two-wire bus, made up of
one clock line and one data line with speeds of up to 400 Kbits per second, based on a byte-ori-
ented transfer format. It can be used with any Atmel Two-wire Interface bus Serial EEPROM and
I²C compatible device such as Real Time Clock (RTC), Dot Matrix/Graphic LCD Controllers and
Temperature Sensor, to name but a few. The TWI is programmable as master transmitter or
master receiver with sequential or single-byte access. A configurable baud rate generator per-
mits the output data rate to be adapted to a wide range of core clock frequencies. Below,
29-1
Table 29-1.
Notes:
Figure 29-1. Block Diagram
I2C Standard
Standard Mode Speed (100 KHz)
Fast Mode Speed (400 KHz)
7 or 10 bits Slave Addressing
START BYTE
Repeated Start (Sr) Condition
ACK and NACK Management
Slope control and input filtering (Fast mode)
Clock strectching
lists the compatibility level of the Atmel Two-wire Interface and a full I2C compatible device.
1. START + b000000001 + Ack + Sr
2. A repeated start condition is only supported in Master Receiver mode. See
”Internal Address” on page 286
(1)
Atmel TWI compatibility with i2C Standard
PMC
APB Bridge
MCK
AT91SAM7X512/256/128 Preliminary
Two-wire
Interface
Atmel TWI
Supported
Supported
Supported
Not Supported
Not Fully Supported
Supported
Not Supported
Supported
Interrupt
TWI
PIO
AIC
(2)
TWCK
TWD
Section 29.5.5
Table
281