AT91SAM7X128-CU Atmel, AT91SAM7X128-CU Datasheet - Page 293

• Manufacturer Part Number: AT91SAM7X128-CU
• Description: MCU ARM 128K HS FLASH 100-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7X128-CU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: CAN, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFBGA
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7X-EK - KIT EVAL FOR AT91SAM7X256/128
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

6120H–ATARM–17-Feb-09
Figure 29-18. TWI Read Operation with Multiple Data Bytes with or without Internal Address
No
AT91SAM7X512/256/128 Preliminary
Read Receive Holding register (TWI_RHR)
Read Receive Holding register (TWI_RHR)
(CLDIV, CHDIV, CKDIV) in TWI_CWGR
- Internal address size (if IADR used)
Set the Master Mode register:
Read ==> bit MREAD = 1
Internal address size = 0?
Set the Control register:
- Device slave address
- Transfer direction bit
Read Status register
Read Status register
Read status register
(Needed only once)
TWI_CR = MSEN
TWI_CR = START
TWI_CR = STOP
Yes
Last data to read
Start the transfer
Stop the transfer
- Master enable
TXCOMP = 1?
Set TWI clock
RXRDY = 1?
Yes
Yes
Yes
RXRDY = 1?
Yes
but one?
BEGIN
END
No
No
No
Set the internal address
TWI_IADR = address
293