AT91SAM7X128-CU Atmel, AT91SAM7X128-CU Datasheet - Page 522

• Manufacturer Part Number: AT91SAM7X128-CU
• Description: MCU ARM 128K HS FLASH 100-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7X128-CU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: CAN, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFBGA
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7X-EK - KIT EVAL FOR AT91SAM7X256/128
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

6120H–ATARM–17-Feb-09
All interrupts are cleared by clearing the interrupt source except for the internal timer counter
overflow interrupt and the timestamp interrupt. These interrupts are cleared by reading the
CAN_SR register.
– Warn Limit interrupt: The CAN module is in Error-active Mode, but at least one of its
– Wake-up interrupt: This interrupt is generated after a wake-up and a bus
– Sleep interrupt: This interrupt is generated after a Low-power Mode enable once all
– Internal timer counter overflow interrupt: This interrupt is generated when the
– Timestamp interrupt: This interrupt is generated after the reception or the
error counter value exceeds 96.
synchronization.
pending messages in transmission have been sent.
internal timer rolls over.
transmission of a start of frame or an end of frame. The value of the internal counter
is copied in the CAN_TIMESTP register.
AT91SAM7X512/256/128 Preliminary
522